663034
29
Zoom out
Zoom in
Vorherige Seite
1/320
Nächste Seite
Get started 1•13
Get started 1•13
This section takes you through the basic steps
required to record a simple multi-track Song and
save it to disk.
For detailed explanations on Song, Song/Style
and Style recording and editing, refer to the ap-
propriate chapters of the Reference Guide.
RECORD THE SONG
1. Press the REAL SONG button in the STYLE/SONG
GROUPS section.
The display shows the available Song Group
locations as “Free”.
2. Select a FREE location.
Use the corresponding Function button. WK3
now sets to Song Mode. One of the tracks
(shown flashing in the Sequencer) will be
active to play in real time.
3. Press RECORD in the SEQUENCER section.
The leds of the RECORD button and the
Track 1 button start to flash. The display also
shows track 1 (Program Change) flashing,
indicating that it is in “record pending” status.
Track 1 will play a Drumkit.
©
Note: Track 1 is assigned a Drumkit and MIDI
Channel 10 by default, in order that you can record
a Song that complies with GM standards.
©
Note: The Song can be given a name using
the PERF NAME function in the Edit Performance
section. The procedure is explained in detail in the
«Sounds and Performances” chapter 4.
Record a Song & save it to disk
1
2
3
This section takes you through the basic steps
required to record a simple multi-track Song and
save it to disk.
For detailed explanations on Song, Song/Style
and Style recording and editing, refer to the ap-
propriate chapters of the Reference Guide.
RECORD THE SONG
1. Press the REAL SONG button in the STYLE/SONG
GROUPS section.
The display shows the available Song Group
locations as “Free”.
2. Select a FREE location.
Use the corresponding Function button. WK3
now sets to Song Mode. One of the tracks
(shown flashing in the Sequencer) will be
active to play in real time.
3. Press RECORD in the SEQUENCER section.
The leds of the RECORD button and the
Track 1 button start to flash. The display also
shows track 1 (Program Change) flashing,
indicating that it is in “record pending” status.
Track 1 will play a Drumkit.
©
Note: Track 1 is assigned a Drumkit and MIDI
Channel 10 by default, in order that you can record
a Song that complies with GM standards.
©
Note: The Song can be given a name using
the PERF NAME function in the Edit Performance
section. The procedure is explained in detail in the
«Sounds and Performances” chapter 4.
Record a Song & save it to disk
1
2
3
Downloaded from www.Manualslib.com manuals search engine
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für General Music WK3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info