22/24
Display DISPA1 shows the ID of the cycle in progress “CL1“,“CL2“ or “CL3“.
Displays DISPC2 and DISPB2 show the current time and day of the week (from 1 to 7)
Display DISPA2 shows the ID of the phase in progress “Phi” if “CL1”, “CL2” or “CL3” are running, if “Chr” is
running it is off.
Display DISPB2 shows the time remaining to the end of each phase of the cleaning cycle.
Display DISPC2 shows, for the phases which provide for a repetition, the number of repetitions that are
missing before moving to the next phase.
Once the cleaning program is complete, the display TEMPO shows the "End" label and the buzzer emits a sound.
Once the buzzer is silenced, the board is set to OFF.
Press any key to silence the buzzer and set the board to OFF.
During the cleaning cycle, press the START/STOP button to block the cycle and set the board to OFF.
If the door is opened, the heating output and the fans turn off, and the timer stops. These are resumed once the
door is closed again.
If there is a power failure during the cleaning cycle, as soon as the power supply is restored, the board shows the
label "PF" on the TEMPERATURE display and the cleaning cycle is not resumed.
During a cleaning program, the heating elements in the cell are activated in order to keep the temperature at the
setpoint value for every single phase.
23. SELECTING A DETERGENT FILLING CYCLE
The detergent filling function "Chr" is always available.
A detergent filling cycle can be selected only in OFF mode.
Press the PROGRAMMES key, display DISPA1 shows the ID of the first cleaning cycle "CL1".
Press the UP or DOWN keys to select the programme "Chr".
Press the START/STOP key to start the programme, the EV DETERGENT FILLING output is enabled for
180 seconds.
The detergent filling programmes are fixed and cannot be modified during the cycle selection phase.
24. DETERGENT PUMP FILLING CYCLE
During the running of a detergent filling cycle:
The EV DETERGENT FILLING output is enabled, the vent is closed.
Display DISPA1 shows the ID of the cycle in progress “Chr".
Displays DISPC2 and DISPB2 show the current time and day of the week (from 1 to 7)
Display DISPA2 is off
Display DISPB2 shows the time remaining to the end of each phase of the cleaning cycle.
Display DISPC2 is off.
At the end of the detergent filling programme, the buzzer emits a continuous sound for 1 sec.
Once the buzzer is silenced, the board is set to OFF.
During the cleaning cycle, press the START/STOP button to stop the detergent cycle and set the board to OFF.
If the door is opened, the EV DETERGENT FILLING output turns off, and the timer stops. These are resumed once
the door is closed again.
If there is a power failure during the detergent filling cycle, as soon as the power supply is restored, the board
shows the "PF" label on the DISPA2 display and the cleaning cycle is not resumed.
At the end of the programme, the buzzer sounds for one second without any visual indication, in the event of a
power failure during the execution, at power restoration the PF is not displayed as for a normal cleaning.
25. WARNINGS AND ALARMS
