795395
102
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
System settings
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_system.fm / 8/10/21
102
Fallback option
In case the internet time servers are not available you can set the time manually.
Enter the time in the System time text field. Once you have started editing the automatic
time update stops.
Act as Local Time Server
You can determine the internal time server to act as local time server for your network. If you
have a time server available, you should not activate this function.
Click on Yes/No to determine the internal time server to act/not to act as local time server.
Firmware
Use this page to make adjustments in order to keep the phone system up-to-date via firmware
updates.
Settings System Firmware
Current version
Shows the current firmware version of the Integrator/DECT manager on which you are logged in.
Backup available for previous version
You can downgrade the firmware by installing any older version. When installing a new firmware
the system automatically creates a data backup for the recent firmware. If you later downgrade
to this version the data backup will be installed on the system. This way you have a downgrade
to previous firmware version and data settings.
Date and time are synchronised system-wide on all base stations and handsets. It can
take up to one hour until the manually changed time is visible on every handset.
Synchronisation is carried out in the following cases:
If a handset is registered to the telephone system.
If a handset is switched off and switched back on again, or is outside the wireless
range of the telephone system for more than 45 seconds and then comes back
into range.
Automatically every night at 4.00 am.
You can change the date and time on the handset. This setting only applies for that
handset and will be overwritten when the next synchronisation takes place.
The date and time are displayed in the format set for that handset.
It is only available in the Integrator user interface for the user role admin.
Regular updates to the firmware for the Integrator/DECT manager and base stations are
provided by the operator or supplier on a configuration server. You can upload these updates
onto the Integrator/DECT manager as required. If a firmware update is provided in the form of
an update file, you can store it on your computer and download it from there.
The base stations‘ firmware is updated automatically by the DECT manager.
102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset Pro N870E IP PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO Bedienungsanleitung - Deutsch - 151 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Holländisch - 150 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Französisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info