795395
104
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
System settings
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_system.fm / 8/10/21
104
Save and restore
This page allows you to save and restore the system configuration.
Settings System Save and restore
Once you have configured the phone system and after making any changes to the configura-
tion, particularly registering or de-registering handsets, you should save the latest settings in a
file on the computer so that the current system can be restored quickly if problems occur.
If you change the settings accidentally or you need to reset the device due to a fault, you can
reload the saved settings from the file on your computer to your telephone system.
The configuration file contains all system data including the DECT registration data of the hand-
sets, but not the calls list on the handsets.
Saving configuration data
Click on Save settings Select the location where the configuration file should be stored
using the system file selection dialogue. Enter a name for the configuration file.
The default file name is
<MAC address of integrator><firmware version><date of export>_device-settings
Restoring configuration data
Click on Browse... Select the previously saved configuration file from the file system of
your computer. Click on Upload . . . the selected configuration file is loaded.
Reboot and reset
This page allows you to reboot the device and to reset the system to factory settings.
Settings System Reboot and reset
It is available in the Integrator user interface for both the user role admin and user. The user is
only allowed to save the settings but not to restore them.
The secured configuration file can also be loaded onto a new device.
Prerequisites:
The old device must no longer be in operation.
The firmware version of the new device must correspond, at least, with the version
of the device from which the data is saved, including the set patches.
It is available in the Integrator user interface for both the user role admin and user.
104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset Pro N870E IP PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO Bedienungsanleitung - Deutsch - 151 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Holländisch - 150 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Französisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info