795395
103
Zoom out
Zoom in
Vorherige Seite
1/142
Nächste Seite
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_system.fm / 8/10/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
System settings
103
Selecting the firmware update file
In the URL to firmware file text field specify the URL of the configuration server where the
firmware is located
or
Click Browse... and select the firmware file from your computer‘s file system.
Starting the firmware update
Confirmed schedule
Shows Immediately or the date for the next planned firmware update.
Click on Set to save the settings and to start the firmware update.
Downgrade to any other version will reset the device to factory settings.
At a specific date: Deselect the check box Immediately Enter the exact start time in the
format: YYYY-MM-DD HH:mm
Immediately: Select the check box next to Immediately (default) . . . the firmware
update is started when you click on the Set button.
Once the update process starts, the system updates the DECT manager and all subordinate base
stations automatically. No action is needed. The handsets lose their connection to the bases
during the updating process. You can tell that the update has been successful when the handsets
re-establish the connection to the base.
You can monitor in the base station list the current version of base station and the base stations
and DECT managers offline most likely for firmware update.
The firmware update may take up a longer period. Do not disconnect the devices
from the local network during this time.
For test reasons (e.g. for testing a new release) it is possible to have a specific firmware
version on a DECT manager subsystem which may be different from the rest of the
system.
Handover between DECT manager systems is only possible if they have a matching
protocol version.
A DECT manager with protocol version different to the system integrator cannot start
it's service because it is not interoperable to the system integrator. It just could do a
software update to a matching software and protocol version.
103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gigaset Pro N870E IP PRO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO Bedienungsanleitung - Deutsch - 151 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Holländisch - 150 seiten

Gigaset Pro N870E IP PRO Bedienungsanleitung - Französisch - 151 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info