Bedienungsanleitung Graupner MX-16 HoTT (Seite 46 von 200) (Englisch)

467107

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Updating the receiver ﬁrmware

Firmware updates for the receiver are carried out using

the telemetry socket on the side of the receiver, in con-

junction with a PC running Windows XP, Vista or 7. For

this you require the optional USB interface, No. 7168.6

and the optional adapter lead, Order No. 7168.6S. The

software and ﬁles also required for the process can

be found in the Download area for the corresponding

product at www.graupner.de.

Note:

Once you have registered your transmitter at https://

www.graupner.de/en/service/product_registration you

will automatically be informed of new updates by e-mail

as they become available.

Updating the receiver ﬁrmware

Important notes:

Please note that reliable communication between •

your system’s HoTT components is only guaran-

teed if the ﬁrmware is compatible. That is why the

programs required to update all the HoTT compo-

nents and ﬁles are grouped in a single ﬁle, which

is currently named HoTT_Software_V4.zip”.

It is essential to check the state of charge of your •

receiver battery before you carry out any update.

For safety’s sake recharge it before updating.

The connection between the receiver and the PC •

or laptop must not be interrupted during the up-

date process, so please ensure that there is reli-

able contact between the receiver and the com-

puter.

Installing the driver1.

The driver software for the USB interface, Order No.

7168.6, is identical to the driver software of the inter-

face ﬁtted to the mx-16 transmitter. This means that

the driver only has to be installed once; the proce-

dure is described on page 39.

Connecting the receiver to the PC2.

Connect the USB interface, Order No. 7168.6 to the

receiver socket marked “- + T” using the adapter lead,

Order No. 7168.6S. The connectors are polarised:

look for the small chamfer on the side. The connec-

tors should engage easily; on no account use force.

Adapter lead

Order No. 7168.6A

If a central red wire is present,

cut through it

Caution:

If your adapter lead is of the earlier three-core

type, ﬁrst cut the central red wire in the adapter

lead, Order No. 7168.6A.

Now connect the USB interface to the PC or laptop

using the USB lead (PC USB / mini-USB) also sup-

plied in the set. When the components are connected

correctly, a red LED on the interface circuit board

should light up red for a few seconds.

The receiver should be left switched off.

Firmware update3.

Start the program “Firmware_Upgrade_grStudio_Ver-

X.X.exe” by double-clicking on it, as described for up-

dating the transmitter software; see page 39. (Version

1.9, which is current at the time this manual went to

press, starts without being installed beforehand.):

Open the “Controller Menu” and click on “Port Select”

in the “Upgrade” folder. Alternatively select the “Port

Select” entry under “Menu”:

Now select the correct COM port in the “Port select”

window, i.e. the port to which the USB interface is

connected. You can recognise this by the name “Sil-

icon Labs CP210x USB to UART Bridge” in the “De-

vice Name” column. In the screen-shot above this

would be the “COM 3” port.

Now call up the “HoTT Receiver” option in the “De-

vice” folder under “Controller Menu”. Alternative-

ly select the “HoTT Receiver Upgrade” entry under

“Menu”:

Firmware update of the receiver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info