Bedienungsanleitung Graupner MX-16 HoTT (Seite 115 von 200) (Englisch)

467107

115

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

115

Program description: helicopter mixers – model helicopter

Simultaneously pressing the 4.  or  buttons of

the right-hand touch-key (CLEAR) resets an altered

value to the default value.

Touch the central 5. SET button of the right-hand touch-

key to conclude the input process.

ptch (Collective pitch (ch1  pitch))

Select the “Collective pitch” line using the arrow buttons

 of the left or right-hand touch key, then touch the

central SET button of the right-hand touch-key:

input

output

point

ptch

normal

The control curve can be based on a maximum of

ﬁve nodes, known as “reference points”, which can be

placed along the length of the control travel; separate

curves can be programmed for each ﬂight phase.

However, in most cases it is sufﬁcient to use a smaller

number of reference points when deﬁning the collective

pitch curve. As a basic rule we recommend that you

start with the three default reference points offered by

the software. These three points, i. e. the two end-points

“Point 1” (collective pitch minimum) and “Point 5” (collec-

tive pitch maximum), and “Point 3”, exactly in the centre

of the travel, initially describe a linear characteristic

for the collective pitch curve; this is represented in the

picture above.

The programming procedure in detail

The throttle / collective pitch stick can now be used to

move the vertical line in the graph between the two

end-points “Point 1” and “Point 5”; at the same time the

momentary position of the stick is displayed in numeric

form in the “Input” line (-100% to +100%).

The point where the vertical line crosses the curve is

termed the “Output”, and this point can be varied within

the range -125% and +125% at a maximum of ﬁve

reference points. The control signal, modiﬁed in this way,

affects the collective pitch servos only. In the picture on

the left the stick is exactly at the 0% position at “Point

3”, and also generates an output signal of 0% due to the

linear nature of the graph.

By default only points “1” (collective pitch minimum at

-100%), “3” (hover point at 0%) and “5” (collective pitch

maximum at +100% travel) are active.

To set a point you use the associated stick to move the

vertical line to the point you wish to change. The number

and current curve value of this point are displayed in

the bottom line in the left-hand half of the screen in the

“Point” line. The arrow buttons of the right-hand touch-

key can now be used to change the current curve value

in the highlighted ﬁeld to any value within the range

-125% to +125%, without affecting the adjacent points.

input

output

point

+75%

ptch

normal

In this example we have moved reference point “3” to

+75%.

However, the optional points “2” and “4” can also be

activated. In the next example we activate point “2” at

-50% …

input

output

point

–50%

–12%

deact

ptch

normal

… and point “4” at +50% …

input

output

point 4

+50%

+88%

deact

ptch

normal

This is accomplished using the stick to move the vertical

line to the appropriate area. As soon as the message

“inactive” appears in the highlighted value ﬁeld, you can

activate the associated point with the arrow buttons of

the right-hand touch-key; it can then be adjusted in the

same manner as the other points …

input

output

point 4

+50%

–50%

ptch

normal

… or reset to “inactive” by simultaneously pressing

the  or  buttons of the right-hand touch-key

(CLEAR).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX-16 HoTT Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX-16 HoTT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info