Bedienungsanleitung Graupner Ultramat 12 (Seite 13 von 36) (Deutsch, Englisch, Französisch)

467066

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

2322

9. Using the charger for the first time

When the ULTRAMAT 12 is initially connected to a 12 V car battery, the unit runs through the

information routine which provides you with a brief summary of the essential user settings. The

charger’s screen displays the following information in sequence:

The ULTRAMAT 12’s name appears on the screen.

The charger is now ready for use.

2 sec.

___________ _____

Graupner

ULTRAMAT 12

________________

NiCd automatic

C:2.5A limited

11. Ni-Cd programs

A set of convenient charge programs for recharging Nickel-Cadmium batteries, as commonly

used for modelling purposes. When the charge / discharge program is finished, the screen

displays the name of the charge program alternating with the message „END“, together with the

charge time, the last (dis-) charge current, the charged-in (discharged) capacity and the battery

voltage, and continues to do so until you disconnect the battery. This information can often give

you a useful indication about the Ni-Cd pack’s charge characteristics and capacity, or warn you

if the charger has incorrectly assessed the pack as being „full“.

NiCd

AUTOMATIC-

program

NiCd

MANUAL-

program

NiCd

discharge

program

NiCd

balance

program

NiCd

∆ ∆

∆

delta-peak

trigger voltage

MODE MODE MODE MODE MODE

10. Starting the charge / discharge process

________________

NiCd automatic

C:2.5A limited

For charging / discharging, or conditioning a pack, select

the desired program as described below, and then set

suitable values.

2 sec.START

________________

BATTERY CHECK

WAIT PLEASE...

___________ _____

AUTO 23:40 00863

NC+2.50A 14,717V

2 sec.

Hold the START button pressed in for about two seconds,

and the charger will measure and assess the battery.

You can interrupt the charge process at any time with another

short press on the START button.

Note: if you interrupt the charge process by pressing

the START button, all display parameters are

irretrievably erased.

7. Program flowchart

6. Charge and discharge programs

The various facilities of the charger are divided up into four program groups which you can select by

holding the MODE button pressed in for two seconds. The sequence is shown in the flow chart

below.

Ni-Cd battery programs: charging, conditioning, discharging to determine capacity or residual

capacity, or to select cells.

Ni-MH battery programs: charging, conditioning, discharging to determine capacity or residual

capacity, or to select cells.

Li-Po / Li-Io battery programs: charging, discharging to determine capacity or residual capacity, or to

select cells.

Lead-acid battery programs: charging, discharging to determine capacity or residual capacity, trickle

charge for stand-by operation.

8. Selecting the charge program group

In the interests of clarity, the charge and set-up facilities of the

ULTRAMAT 12 are divided into four logical program groups.

A separate program group is provided for each of the different

battery types: Nickel-Cadmium, Nickel-Metal-Hydride, Lithium-

Ion / Lithium-Polymer and Pb (lead-acid) batteries.

A supplementary program group contains the individual adjust-

ment facilities for the charger overall.

Switching programs:

y Changing from one charge program group to another is not

possible if the charger is currently engaged in a charge /

discharge process.

y Changing from one program group to another is carried out using

the MODE button, which must be held pressed in for about two

seconds. A brief press on the MODE button makes changes within

the program group.

NiCd

AUTOMATIC

program

MODE

NiMH

AUTOMATIC

program

MODE

MANUAL

program

MODE

Lithium

MANUAL

program

MODE (2 sec.)

NiCd

AUTOMATIC-

program

NiCd

MANUAL-

program

NiCd

discharge

program

NiCd

balance

program

NiMH

AUTOMATIC-

program

NiMH

balance

program

NiMH

MANUAL-

program

MANUAL-

program

discharge

program

Lithium

MANUAL-

program

Lithium

discharge

program

NiMH

discharge

program

Lithium

type

select

NiCd

∆ ∆

∆

delta-peak

trigger voltage

NiCd

∆ ∆

∆

delta-peak

trigger voltage

MODE MODE MODE MODE MODE

MODE MODE MODE

MODE MODE

MODE (2 sec.)

MODE

(2 sec.)

MODE

(2 sec.)

MODE

(2 sec.)

MODE

(2 sec.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner Ultramat 12 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner Ultramat 12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info