ENGLISH
23
BASIC SETTINGS
________________________________________________________________________
Attention:
The following setting »A/V Mode CVBS« should only be changed if your
TV set is equipped with
RGB or Y/C inputs and
if the TV set and the satellite receiver are connected with a Eur
o-AV cable
with all pins used.
– Refer to the user manual of the TV set.
5 Select the »A/V Mode« row using the »
,,..
« buttons then use the
»
;; ::
« buttons to select the »RGB« or »Y/C« setting.
6 Press the »
i
« or »TXT
ķ
« button to exit the menu.
Adjusting the satellite receiver to the satellite antenna
Note
This satellite receiver has been preset at the factory so that it is ready for
operation with most satellite antennas and LNB configurations without the
need of making complicated adjustments.
This ensures a fast access without problems to the satellite channels.
Important:
If the reception of satellite channels should nevertheless be not possible,
or
the satellite receiver is operated, for example, on an antenna system for
multiple satellite reception, then it must first be adjusted to the satellite
antenna and LNB configuration used.
Please now
first read page 40, chapter »LNB Configurations« and then the
settings on the pages 41 to 43, chapter »Adjusting the satellite receiver to
the satellite antenna and the LNB configuration«, in the menu »LNB Con-
figuration«.
Note
Your antenna technician or specialized dealer which has installed your
antenna system will be glad to provide you with detailed information about
all settings required.
System Parameters
Select A/V output mode you want.
[TXT]-Previous
Parental Control
System Information
19/09/2000 16:45Local time / Timer
No
Multi
Yes
ľ
4x3
ı
P/S
DL Saving
10%OSD Trans.TV Type
Teletext
Aspect Ratio
Screen
A/V Mode
ľ
CVBS
ı
