ķ
15
GB
Deactivating coding
before removing the car radio, for example.
1. The EXPERT mode must be switched on
and ”SAFE” indicated in the display.
Activate the change mode:
Briefly press the right-hand
¢¢
control
knob. The display indicates ”
CH 1 - - - -”
(CH = Change).
2. Enter the code number (on the Identity
Card) by turning the right-hand
¢¢
control
knob as described under ”Activating
Coding”
3. Confirm the code number:
Press the right-hand
¢¢
control knob until
”CODE” appears briefly in the display.
The radio will play after approximately
3 seconds.
Coding is deactivated!
If you have entered the incorrect code
number:
"SAFE" remains in the display and the radio
does not play.
Begin again. Be sure to observe the waiting
periods between attempts (see page 16).
ǺǺ Your personal code number is on the iden-
tity card of your car radio.
Coding is not activated when the radio lea-
ves the factory.
If you have “activated” your car radio's
coding: As soon as you disconnect the car
radio from the car battery (or permanent
plus terminal 30), it is electronically
blocked.
Only you are able to put it back into opera-
tion by entering your personal Code Number.
Is the coding activated?
Activate the EXPERT mode and turn the
left-hand
¢¢
control knob until the display indi-
cates "SAFE" or "CODE".
Coding activated.
Coding not activated.
Activating the coding
1. Select the EXPERT control level and turn
the left-hand
¢¢
control knob until ”CODE”
appears in the display.
Activate the change mode:
Briefly press the right-hand
¢¢
control
knob. The display indicates ”
CH - - - -”
(CH = Change).
2. Enter the code number (on the Identity
Card): Use the right-hand
¢¢
control knob
to enter the correct number.
ǺǺ When the right-hand
¢¢
control knob is
turned quickly, it will function like a
flywheel.
3. Confirm the code number:
Briefly press the right-hand
¢¢
control knob.
”SAFE” appears in the display.
Coding is activated!
4. Deactivate the EXPERT control level:
Press the
¡
button or the right-hand
¢¢
control knob until the signal sounds.
Coding
