Bedienungsanleitung Grundig SI 4550 (Seite 20 von 80) (Deutsch, Englisch, Französisch, Spanisch, Polnisch, Türkisch)

712290

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

OPERATION ______________________________

Preparation

1 Remove all packaging materials, labels and

protective foil and dispose of them according

to the applicable legal regulations.

2 Clean the outer parts of the appliance as

described in the section “Cleaning and care“.

3 Place the appliance on an even, stable, dry

and non-slip surface.

Notes

During the first use, a light odour may arise

from the iron. This ceases after a couple of

uses.

The “CLICK” sound you hear during ironing,

is because of the anti-drip feature of your

appliance. This is a normal sound.

In order to generate steam, the soleplate

of your iron has to rise to a certain level of

temperature. By means of the “anti-drip”

feature of your iron, water dripping from the

soleplate

of the iron shall be prevented until

the soleplate attains the temperature required.

Your product is intended for use with tap

water. If your tap water is excessively limy,

we recommend to use a mixture of tap water

with purified water. Prior to ironing for the first

time fill twice and vaporize. Meanwhile, use

the steam burst

frequently. In this way, both

the steam performance will improve and also

the dust particles which might have penetrated

through the steam channels will be cleaned up.

If water runs out during ironing, you can top

up water without waiting the appliance to cool

down. But do not forget to unplug it before

topping up.

When spray does not squirt water, in order

to eliminate any possible blocking, close the

spray hole with your finger and press on the

spray button several times.

Caution

When your iron is filled with excessive water,

it may overflow. To avoid this, when you hold

your iron horizontally, make sure that the level

of water in the appliance does not exceed the

MAX. line.

Dry ironing

1 Set the steam setting knob

to the “ ”

position.

Caution

Always read the care label on your garment

before setting the temperature.

2 Set the required ironing temperature. Do not

press the steam burst button during dry ironing.

3 After ironing let the appliance cool down in a

location that is safely out of reach of children.

Filling in the water tank

1 Always unplug the appliance. Set the steam

setting knob to “ ” position.

2 Open sealing cap of ﬁlling inlet

on the iron.

Use cups for ﬁlling the water tank. Do not ﬁll the

water tank further than up to the MAX marking.

3 Close the water reﬁll lid

Note

Even when ironing garments without steam;

water should be available in the appliance in

order to use the water spray

Do not fill the water tank with perfume, vinegar,

laundry starch, lime removers or other products

or chemicals which shall facilitate the ironing

process.

If your tap water is excessively limy, we

recommend to use a mixture of tap water with

purified water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig SI 4550 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info