Bedienungsanleitung Grundig SI 4550 (Seite 21 von 80) (Deutsch, Englisch, Französisch, Spanisch, Polnisch, Türkisch)

712290

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

OPERATION ______________________________

Setting the temperature

1 After plugging in the iron, set required ironing

temperature by turning the temperature setting

dial

to the appropriate position (see the

temperature and steam settings table below).

2 The temperature of your appliance can

be increased by turning the temperature

setting dial

clockwise. For steam ironing

temperature setting dial

should be in the

range between ••• and MAX.

When setting the temperature of your appliance,

we recommend to consider the following table.

Fabric

Type

Temperature

Setting

Steam Setting

Synthetic

•

Without steam

Silk

•

Without steam

Wool

••

Without steam

Cotton

•••

With steam

Linen -

Jeans

MAX With steam

3 In order to learn the ironing temperature to be

used, check the garment’s care label.

4 If you don’t know the fabric of your garment,

ﬁrst iron a part that is not visible and determine

a correct ironing temperature for it.

5 In order to prevent shiny stains that may form

on synthetic fabrics or silk, iron on the reverse

side of the fabric. Do not use the spray function

in order to prevent the stain formation.

Steam ironing

1 Set the desired steam level by pushing the

steam setting knob

2 Set the required ironing temperature (see

chapter “Setting the temperature”). Make sure

that the temperature setting dial

is within

the range between ••• and MAX. When

the thermostat warning light

turns oﬀ, the

soleplate temperature has reached the level to

generate steam.

Vertical steam ironing

Note

Vertical steam ironing can be applied to

hanging clothing items (suits, jackets and

coats).

Caution

Never direct the steam at people or pets.

1 Set the desired steam level by pushing the

steam setting knob

2 Hold the iron in a vertical position and press

the steam burst button

to steam iron your

curtains and your garments on the hanger.

Steam burst

1 During ironing, in order to remove tenacious

creases, you can gain strong steam by pressing

on the steam burst button

for 3-4 times with

5-second intervals.

2 When you start to iron, steam burst may not

emit in your ﬁrst couple of presses. In order to

gain steam burst, the temperature setting dial

should be at ••• or a higher level.

3 You can iron the creased parts of the garments

with the steam power which is obtained by

pressing the steam burst button

during steam

ironing. However if this process is maintained

without an interruption, water may also come

from the iron soleplate

along with the steam.

Water spray

1 Make sure there is suﬃcient water in the water

tank. Spray function can be used in order to

remove tenacious creases by pressing the

spray button

during dry or steam ironing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig SI 4550 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info