Bedienungsanleitung Gude TKGS 1800 (Seite 19 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch)

624753

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Qualification

No special qualification is required for use of the

unit except for detailed direction by a

professional.

Minimum Age

Only persons above 16 years of age are allowed

to work with the unit.

Exempted from the provision is the use of the

juvenile trainees if they work in the course of

their professional training with an aim to obtain

the skill under trainer supervision.

Training

Use of the unit requires adequate lesson by a

professional or the use of the manual only .

Special training is not required.

Technical Data

TKGS 1800

Supply connection :

230 V/50 Hz

Max. output

1800 W/P1

Motor speed:

4800 min

-1

Protection type:

IP 33

Protection class:

Saw blade diameter/teeth :

250 x 20 mm/60 teeth

Max. cutting depth at 0°/0°

20 x 175 mm

Max. cutting depth at 45°/45°

50 x 120 mm

Max. cutting depth at 45°/45°

30 x 120 mm

Max. cutting depth at 45°/45°

50 x 115 mm

Weight ca:

32 kg

Dimensions L x W x H (mm)

800 x 630 x 820

EAN:

4015671 551700 2

Ordering No. : 55170

Transportation and Storage

• The unit should be cleaned thoroughly for a

longer storage. .

• Always push the blade in before putting the

unit on storage to avoid accidents.

• Protect the saw with a plastic cover,

cardboard etc. from weather effects.

Assembly and Initial Operation

(Fig. 2+3+4)

Turn the main element (Fig. 2) backward, feet

may be put in the working position in an easier

way then.

The lock screws (Fig. 3/4) to be loosened so that

the feet may be lifted out.

Then, tighten the screws to fasten all the four

feet.

Now, put the main element in the vertical position

again.

Use as a bench circular saw

(Abb. 4+5+6+78+9+10+11)

To use the saw as a bench circular saw, press

the lever (Fig. 4) down and turn the bench

around until a click is heard.

Now, loosen the butterfly screw (Fig. 6) with

which the splitting wedge is affixed.

There are two grooves of the splitting wedge

attachment cylinder (Fig. 6), therefore, two

setting-up options exist.

Press the saw handle lever locking the blade

guard (Fig. 7), push the blade guard up and

place the splitting wedge according to, fit in the

butterfly screw again.

Caution, always make sure to see that the

distance of the splitting wedge from the blade

is sufficient.

Screw in the screw (Fig. 8) to the stop so that the

saw is tilted down.

Press the lever (Fig. 9) down and turn the bench

around until a click is heard.

Pressing the knob (Fig. 10) on the blade guard,

the blade may be attached to the splitting wedge.

If dust extraction facility is not used, connect a

dust-collecting bag under the table to an outlet.

The mitre cut (Fig. 11) or the parallel stop (Fig.

11) to be fitted according to (Fig. 11) .

The saw is now ready for the bench mood.

Use as trimming or mitre saw

(Fig. 9+13+15+16+17+18)

To use the saw as a trimming or mitre cutting

saw, press the lever (Fig. 9) to unblock the

bench. It may be folded up then. With the turning

completed, the bench should be heard to click.

Push the orange knob (Fig. 13), turn it and let it

sink into the position. Now, put the saw unit in a

vertical position.

Caution

Enable the depth limiter with the lever (Fig. 14).

Caution

Change the splitting wedge position using the

butterfly screw (Fig. 15). The splitting wedge

should be put backwards so that the position of it

is in parallel to the blade, see (Fig. 16). To do

that, the opposite groove is used, see „Step 5

Use as a bench circular saw“.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude TKGS 1800 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info