Bedienungsanleitung Haas-Sohn HUSUM (Seite 3 von 6) (Englisch)

564763

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

In the case of Type 1 stoves the closing springs of the

firebox door must not be removed if such an appliance will

be connected to a chimney with multiple-connection facility.

Classification as Type 1 is determined by self-closing

firebox doors. The firebox doors must only be opened to add

fuel and remove ash. Otherwise the doors must be kept

closed – even if the stove is not operated – to avoid

impairing other fireplaces and related hazards.

Adequate fresh air supply to the installation room must be

guaranteed. Windows and doors of the installation room

must not seal too tightly because of the necessary

combustion air supply. Even when operating waste air

systems (bathroom extraction fans, vapour extraction in

kitchens etc.) in your home or in living units connected with

the former it is imperative to ensure the unobstructed flow of

the required quantity of air to the stove.

Caution! The wood stove must not be operated jointly

with controlled home ventilation systems.

The operation of stoves is not threatened if the systems

circulate air only within a room or the systems have safety

installations which automatically and reliably prevent a

vacuum in the installation room. It is imperative to clarify

adequate combustion air supply with your master chimney

sweep.

By burning fuel, heat energy is liberated resulting in intense

heating of the surfaces of the heating appliance (doors, door

and operating handles, view window panes, side walls, front

walls, flue pipes). Touching these parts without suitable heat

protection gloves should be avoided! A heat protection glove

is supplied with the chimney stove.

When heating your wood stove do not wear any wide or

inflammable items of clothing!

Explain these dangers to children and keep them away from

the fireplace during heating.

If incorrect or over-moist fuel is used a chimney fire may

result due to deposits in the chimney. Immediately seal all

air openings in the stove and notify the fire brigade. Once

the fire in the chimney has died down have it inspected by a

specialist for cracks and leaks.

3. Data for calculating the chimney dimensions

according to DIN 4705 Part 2

The data to calculate the chimney dimensions according to

DIN 4705 Part 2 can be found in the enclosed Equipment

Sheet.

4. Installing and connecting the wood stove to

the chimney

Your new wood stove is optimally protected against damage

by the packaging. However, damages to stove or accessories

may have occurred during the transport despite this. For this

reason it is necessary to check your wood stove for damages

and completeness after unpacking! Immediately report any

defects to your specialist stove dealer!

Note: Draft baffle plates that are loose or have slipped from

the anchorage are not considered defects (see Chapter 5.3.

Initial start-up of your chimney stove).

The packaging of your wood stove is largely

environmentally neutral. The wood of the packaging is not

surface-treated and can be used as fuel after it has been

reduced in size. The cardboard and the foils can be easily

supplied to the communal station for residual material

utilisation.

Use a flue pipe of 2 mm thick steel sheet for connection to

the chimney.

The flue pipe must be firmly and tightly connected with both

the flue gas socket and the chimney. This firm and tight

connection is also a necessity for inter-joining the flue pipe

sections. It is imperative to ensure that the flue pipe does not

project into the free cross section of the chimney. To

introduce the pipe into the chimney the use of a masonry

liner is recommended.

In the case of extended flue gas piping horizontal sections

and constrictions must be avoided; piping rising in the

direction of the chimney is recommended. If there is low

chimney draft we recommend connecting the stove by way

of a vertical pipe section at least 1 m in length.

Safety distances (minimum distances):

When installing the wood stove the fire protection

regulations issued by the authorities must always be

followed. Ask your district master chimney sweep in this

regard.

The following minimum distance to combustible or

temperature-sensitive materials (e.g. furniture, wallpaper,

wood panelling) or supporting walls must be maintained (see

drawing):

A 20 cm to the rear wall,

B 20 cm to the side walls and

C 80 cm in the radiation area.

In the radiation area (C) no flammable building components

or furniture should be placed within a distance of 80cm from

the transparent window. This distance can be reduced to

40cm if a radiation protection plate that is well-ventilated on

both sides is placed between the stove and the flammable

building components.

Caution! In Corner Models and models with lateral

windows the minimum distance to combustible materials

and furniture specified on the nameplate must always be

followed.

In the case of combustible or temperature-sensitive flooring

the appliance must be placed on a non-combustible floor

protection slab (e.g. steel plate, glass).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haas-Sohn HUSUM Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Haas-Sohn HUSUM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info