683782

Hako Scrubmaster B140R Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
The machine must not be operated in
areas endangered by risks of explosion.
The machine may be used only for
hard floorings in indoor areas and for
operation on plane areas with a maxi-
mum inclination of up to 2%.
Driving e.g. on ramps with a maximum
inclination of 10% is only allowed for
transportation. Uphill drive must not
exceed 1 minute and particular care
has to be taken.
Repair, maintenance and cleaning
work must only be performed if the
master key is removed.
Before working on the electrical system,
be sure to disconnect the battery
plug.
Taking other persons than the opera-
tor with the Hakomatic is not allowed.
If the Hakomatic is equipped with a
driver seat, it may only be turned on
when the operator is seated (seat
switch).
A perfect maintenance of the machine
mainly helps preventing accidents.
When performing repair, maintenance,
setting or other work the appropriate
tools have to be used. Other spare
parts than the genuine Hako spare
parts must at least equal the original
parts as far as the safety standards
are concerned.
The Hakomatic B 910 has to be chek-
ked by an expert in regular inter-
37
intervals for its proper and safe opera-
tion (we recommend a check once
yearly at least) and after modification
or repair.
The Hakomatic must be equipped
by brushes and pads as requires the
manufacturer (refer to section ”Tech-
nical data”). Using other brushes/pads
than indicated affects your safety.
Do not clean the machine by means
of vapor jet or high pressure cleaning
equipment.
For an increased danger of tilting, the
pneumatic tire equipment of the Hako-
matic is not admissible.
Do not allow water to enter any elec-
trical parts.
The machine is splash proof (IPX3).
Do not allow water to get in the ma-
chine in the driver’s seat area as it
may be collected on the battery stored
below the seat, remove water if
required.
Particular instructions for safe
handling of batteries
(See enclosed leaflet 88-60-2556)
Notes on warranty
The terms of the sales contact apply.
Damages are not subject to warranty
if they are due to non-compliance with
the maintenance and service provi-
sions. Any maintenance work has to
be performed by an authorized Hako
service work-shop and confirmed in
the „maintenance certificate“ which is
the warranty document.
The following is excluded from war-
ranty:
natural wear and tear after overload,
fuses and damages caused by inex-
pent handling and unauthorized modi-
fication of the machine.
Moreover, any claim for warranty be-
comes extinct if damages at the ma-
chine are caused by fitting of parts or
accessories without Hako’s prior and
explicit consent or by noncompliance
with the maintenance instructions.
The machine must not be operated in
areas endangered by risks of explosion.
The machine may be used only for
hard floorings in indoor areas and for
operation on plane areas with a maxi-
mum inclination of up to 2%.
Driving e.g. on ramps with a maximum
inclination of 10% is only allowed for
transportation. Uphill drive must not
exceed 1 minute and particular care
has to be taken.
Repair, maintenance and cleaning
work must only be performed if the
master key is removed.
Before working on the electrical system,
be sure to disconnect the battery
plug.
Taking other persons than the opera-
tor with the Hakomatic is not allowed.
If the Hakomatic is equipped with a
driver seat, it may only be turned on
when the operator is seated (seat
switch).
A perfect maintenance of the machine
mainly helps preventing accidents.
When performing repair, maintenance,
setting or other work the appropriate
tools have to be used. Other spare
parts than the genuine Hako spare
parts must at least equal the original
parts as far as the safety standards
are concerned.
The Hakomatic B 910 has to be chek-
ked by an expert in regular inter-
37
intervals for its proper and safe opera-
tion (we recommend a check once
yearly at least) and after modification
or repair.
The Hakomatic must be equipped
by brushes and pads as requires the
manufacturer (refer to section ”Tech-
nical data”). Using other brushes/pads
than indicated affects your safety.
Do not clean the machine by means
of vapor jet or high pressure cleaning
equipment.
For an increased danger of tilting, the
pneumatic tire equipment of the Hako-
matic is not admissible.
Do not allow water to enter any elec-
trical parts.
The machine is splash proof (IPX3).
Do not allow water to get in the ma-
chine in the driver’s seat area as it
may be collected on the battery stored
below the seat, remove water if
required.
Particular instructions for safe
handling of batteries
(See enclosed leaflet 88-60-2556)
Notes on warranty
The terms of the sales contact apply.
Damages are not subject to warranty
if they are due to non-compliance with
the maintenance and service provi-
sions. Any maintenance work has to
be performed by an authorized Hako
service work-shop and confirmed in
the „maintenance certificate“ which is
the warranty document.
The following is excluded from war-
ranty:
natural wear and tear after overload,
fuses and damages caused by inex-
pent handling and unauthorized modi-
fication of the machine.
Moreover, any claim for warranty be-
comes extinct if damages at the ma-
chine are caused by fitting of parts or
accessories without Hako’s prior and
explicit consent or by noncompliance
with the maintenance instructions.
The machine must not be operated in
areas endangered by risks of explosion.
The machine may be used only for
hard floorings in indoor areas and for
operation on plane areas with a maxi-
mum inclination of up to 2%.
Driving e.g. on ramps with a maximum
inclination of 10% is only allowed for
transportation. Uphill drive must not
exceed 1 minute and particular care
has to be taken.
Repair, maintenance and cleaning
work must only be performed if the
master key is removed.
Before working on the electrical system,
be sure to disconnect the battery
plug.
Taking other persons than the opera-
tor with the Hakomatic is not allowed.
If the Hakomatic is equipped with a
driver seat, it may only be turned on
when the operator is seated (seat
switch).
A perfect maintenance of the machine
mainly helps preventing accidents.
When performing repair, maintenance,
setting or other work the appropriate
tools have to be used. Other spare
parts than the genuine Hako spare
parts must at least equal the original
parts as far as the safety standards
are concerned.
The Hakomatic B 910 has to be chek-
ked by an expert in regular inter-
37
intervals for its proper and safe opera-
tion (we recommend a check once
yearly at least) and after modification
or repair.
The Hakomatic must be equipped
by brushes and pads as requires the
manufacturer (refer to section ”Tech-
nical data”). Using other brushes/pads
than indicated affects your safety.
Do not clean the machine by means
of vapor jet or high pressure cleaning
equipment.
For an increased danger of tilting, the
pneumatic tire equipment of the Hako-
matic is not admissible.
Do not allow water to enter any elec-
trical parts.
The machine is splash proof (IPX3).
Do not allow water to get in the ma-
chine in the driver’s seat area as it
may be collected on the battery stored
below the seat, remove water if
required.
Particular instructions for safe
handling of batteries
(See enclosed leaflet 88-60-2556)
Notes on warranty
The terms of the sales contact apply.
Damages are not subject to warranty
if they are due to non-compliance with
the maintenance and service provi-
sions. Any maintenance work has to
be performed by an authorized Hako
service work-shop and confirmed in
the „maintenance certificate“ which is
the warranty document.
The following is excluded from war-
ranty:
natural wear and tear after overload,
fuses and damages caused by inex-
pent handling and unauthorized modi-
fication of the machine.
Moreover, any claim for warranty be-
comes extinct if damages at the ma-
chine are caused by fitting of parts or
accessories without Hako’s prior and
explicit consent or by noncompliance
with the maintenance instructions.
The machine must not be operated in
areas endangered by risks of explosion.
The machine may be used only for
hard floorings in indoor areas and for
operation on plane areas with a maxi-
mum inclination of up to 2%.
Driving e.g. on ramps with a maximum
inclination of 10% is only allowed for
transportation. Uphill drive must not
exceed 1 minute and particular care
has to be taken.
Repair, maintenance and cleaning
work must only be performed if the
master key is removed.
Before working on the electrical system,
be sure to disconnect the battery
plug.
Taking other persons than the opera-
tor with the Hakomatic is not allowed.
If the Hakomatic is equipped with a
driver seat, it may only be turned on
when the operator is seated (seat
switch).
A perfect maintenance of the machine
mainly helps preventing accidents.
When performing repair, maintenance,
setting or other work the appropriate
tools have to be used. Other spare
parts than the genuine Hako spare
parts must at least equal the original
parts as far as the safety standards
are concerned.
The Hakomatic B 910 has to be chek-
ked by an expert in regular inter-
37
intervals for its proper and safe opera-
tion (we recommend a check once
yearly at least) and after modification
or repair.
The Hakomatic must be equipped
by brushes and pads as requires the
manufacturer (refer to section ”Tech-
nical data”). Using other brushes/pads
than indicated affects your safety.
Do not clean the machine by means
of vapor jet or high pressure cleaning
equipment.
For an increased danger of tilting, the
pneumatic tire equipment of the Hako-
matic is not admissible.
Do not allow water to enter any elec-
trical parts.
The machine is splash proof (IPX3).
Do not allow water to get in the ma-
chine in the driver’s seat area as it
may be collected on the battery stored
below the seat, remove water if
required.
Particular instructions for safe
handling of batteries
(See enclosed leaflet 88-60-2556)
Notes on warranty
The terms of the sales contact apply.
Damages are not subject to warranty
if they are due to non-compliance with
the maintenance and service provi-
sions. Any maintenance work has to
be performed by an authorized Hako
service work-shop and confirmed in
the „maintenance certificate“ which is
the warranty document.
The following is excluded from war-
ranty:
natural wear and tear after overload,
fuses and damages caused by inex-
pent handling and unauthorized modi-
fication of the machine.
Moreover, any claim for warranty be-
comes extinct if damages at the ma-
chine are caused by fitting of parts or
accessories without Hako’s prior and
explicit consent or by noncompliance
with the maintenance instructions.
Scrubmaster is not allowed.
Scrubmaster is equipped with a
Scrubmaster B140 R has to be chek-
Scrubmaster must be equipped
Scrub-
master B140 R is not admissible.
… 5 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hako Scrubmaster B140R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info