Bedienungsanleitung Harman Kardon AVR142 (Seite 11 von 24) (Englisch)

502641

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ENGLISH

Installation and Connections

INSTALLATION AND CONNECTIONS

Connect the 5. Composite Monitor Output



jacks on the receiver to the composite input of your

television monitor or video projector.

If your DVD player and monitor both have

component video connections, connect the

component outputs of the DVD player to the

Video 1 Component Video Inputs



. Note

that even when component video connections are

used the audio connections must still be made to

either the analog DVD Audio Inputs



or any

of the Coaxial or Optical Digital Input jacks



If another component video device is available,

connect it to the Video 2 Component Video

Input jacks



. The audio connections for this

device should be made to either the Video 2

Input jacks

or any of the Coaxial or Optical

Digital Input jacks



If the component video inputs are used, connect

the Component Video Output



to the

component video inputs of your TV, projector or

display device.

If you have a camcorder, video game or other audio/

video device that is connected to the AVR on a

temporary, rather than permanent basis, connect

the audio, video and digital audio outputs of that

device to the Front Panel Inputs



A device connected to the Video 3 jacks



selected as the Video 3 input, and connected to

the digital jacks



it is selected as "Optical

3" or "Coaxial 3" input. (See page 14 for more

information on input configuration.)

Connect the AVR to your video display using one of 10.

the following connections, even if you will also use

an HDMI connection:

If your video display has component

video inputs (Y/Pr/Pb), connect the

ComponentVideo Output



If your display does not have component video

inputs, connect the Video Monitor Output



(Composite) on the AVR to the matching

input on your display. Only one connection is

needed.

Video Connection Notes:

Y/Pr/Pb Component, RGB, or Composite video t

signals may only be viewed in their native formats

and will not be converted to the other formats.

All component inputs/outputs can be used for RGB t

signals too, in the same way as described for the

Y/Pr/Pb signals, then connected to the jacks with

the corresponding color. But this is only correct

as long as only the three RGB video signals are

output by the video source, with a sync signal in

the "G" signal only, without any sync signal output

separately by the source.

HDMI Connections

HDMI™ is the abbreviation for High-Definition

Multimedia Interface, which is quickly becoming the

standard connection point between advanced video/

audio source products and displays, particularly

for high-definition video signals. HDMI is a digital

connection, eliminating the need to convert signals

back and forth from digital to analog.

Some source or display components in your system

may use DVI (Digital Video Interface) for digital video

connections. DVI carries the same digital video signals

as HDMI but uses a larger connector and does not

transport audio or control signals. In most cases,

you may mix and match DVI and HDMI digital video

connections by using optional connector adapters.

Note, however, that some DVI-equipped video displays

are not compatible with the HDCP copy protection

coding that is increasingly carried with signals

connected via HDMI. If you have an HDMI source and a

DVI-equipped display, you may occasionally be unable

to view a program if the display does not include HDCP.

This is not the fault of the AVR or your source; it simply

indicates that the video display is not compatible.

The AVR 142 is equipped for HDMI switching, which

means that it is able to select either of the three HDMI

inputs as the source that feeds your system’s video

display. This preserves the digital signal in its original

form by passing it directly through from source to

display. However, this also means that the AVR does

not have access to the signal and thus it is not able to

add menus or on-screen messages to HDMI signals, or

to process the audio that may be part of the signal in

an HDMI connection.

Therefore, the following connections are required

when the AVR is used with HDMI sources:

Connect the HDMI output of a source to either of

the HDMI Inputs



Connect the

t HDMI Output



of the AVR to an

HDMI input on your display.

Connect either an optical or coaxial digital audio

output from the source to the AVR. The default

connections are Coaxial 2



for a source

connected to HDMI 1



and Optical 2



for a

source connected to HDMI 2



. You may use any

digital or analog audio source in conjunction with

the HDMI inputs, but if it varies from the default

you must make a change to the input’s setting, as

shown on page 18.

Even when HDMI inputs are used, it is important

to make sure that a component or composite

video connection is made between the AVR and

your display. This is needed to view both the

setup menus and onscreen messages, and to

view other (non-HDMI) video sources. The AVR

does not convert analog video signals to HDMI.

All component inputs/outputs can be used for RGB t

signals too, in the same way as described for the

Y/Pr/Pb signals, then connected to the jacks with

the corresponding color. But this is only correct

as long as only the three RGB video signals are

output by the video source, with a sync signal in

the "G" signal only, without any sync signal output

separately by the source.

Harman Kardon AVR142 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR142

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info