Bedienungsanleitung Harman Kardon AVR7200 (Seite 7 von 52) (Englisch)

502637

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

FRONT-PANEL INFORMATION DISPLAY

FRONT-PANEL INFORMATION DISPLAY 7

A Upper Display Line

B Lower Display Line

C OSD Indicator

D Multiroom Indicator

E Speaker/Channel Input Indicators

F PRESET Indicator

G MEMORY Indicator

H STEREO Indicator

I TUNED Indicator

J AUTO Indicator

K 192kHz Indicator

L 96kHz Indicator

A Upper Display Line: Depending on the unit’s status,

a variety of messages will appear here. In normal opera-

tion, the current audio and video input source information

will appear on this line.

B Lower Display Line: Depending on the unit’s

status, a variety of messages will appear here. In nor-

mal operation, the current surround mode name will

appear on this line.

C OSD Indicator: When the OSD system is in use,

this indicator lights to remind you that the other indica-

tors in this display do not function when the On-

Screen Display is being used.

D Multiroom Indicator: This indicator lights when

the multiroom system is active. It will remain lit when

the multiroom system is in use even though the main

room system is in the Standby mode and all other

indicators are dark. (See page 36 for more informa-

tion on the Multiroom system.)

E Speaker/Channel Input Indicators: These indica-

tors are multipurpose, indicating either the speaker type

selected for each channel or the incoming data-signal

configuration. The left, center, right, right surround, left

surround, right surround back and left surround back

speaker indicators are composed of three boxes, while

the subwoofer is a single box. The center box lights

when a “Small” speaker is selected, and the

two outer

boxes light when “Large” speakers are selected.When

none of the boxes are lit for the center, surround

or sub-

woofer channels, no speaker has been selected for one

of those positions. (See page 21 for more information

on speaker setup.) The letters inside each of the

center

boxes display the active input channels. For standard ana-

log inputs, only the L and R will light, indicating a stereo

input. When a digital source is playing, the indicators

will

light to display the channels being received at the digital

input. When the letters flash, the digital input has been

interrupted. (See page 31 for more information on the

Channel Indicators.)

F PRESET Indicator: This indicator lights when the

tuner is in use to show that the preset number for the

current station being listened to appears in the Upper

Display Line. (See page 32 for more information on

tuner presets.)

G MEMORY Indicator: This indicator flashes when

entering presets and other information into the tuner’s

memory.

H STEREO Indicator: This indicator lights when an

FM station is being tuned in stereo.

TUNED Indicator:

This indicator lights when a sta-

tion is being received with sufficient signal strength to

provide acceptable listening quality.

J AUTO Indicator: This indicator lights when the

tuner’s Auto mode is in use.

K 192kHz Indicator: This indicator lights when the

input source has a 192kHz bit rate.

L 96kHz Indicator: This indicator lights when the

input source has a 96kHz bit rate.

AVR 7200 OM 1/27/03 4:46 PM Page 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR7200 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info