502637

Harman Kardon AVR7200 Seite 44

44
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
44 CONFIGURING THE REMOTE
CONFIGURING THE REMOTE
Figure 57
7. Once the punch-through is programmed, the
Channel Up/Down Buttons of the second device
named will be used when those buttons
X
are
pressed while the master device is in use.
Returning the Channel Control Settings to
Default Operation:
If you wish to remove the Channel Punch-Through
so that the commands for Channel Up/Down are
returned to the factory default setting, follow the steps
shown above, except that in Steps 4 and 5, select
the same device for both the
DEVICE IN USE on
the left side of the bottom line and the PUNCH-
THROUGH device. In the example used, the display
to return the remote to default settings will appear as
shown in Figure 58.
Figure 58
Transport Punch-Through
The Transport Controls Play q, Stop
J
,Fast
Forward/Reverse
I
,Pause
J
, Record
J
and Skip Up/Down
K
are set at the factory to
operate your DVD player, or the controls of a specific
device such as a VCR or CD player when they are
selected. However, by using the Transport Punch-
Through feature you may program these controls to
transmit the commands for a different device. For
example, you may wish to operate the transport of a
second VCR connected to the VID 2/TV input, as
shown in the following example.
1. Press and hold the
Program Button
O
for
about three seconds while the message shown
in Figure 15 appears in the remote’s LCD
Information Display
2
. Release the button
when the red light under the Set Button
F
appears.
2. The remote’s MAIN MENU message (Figure 16),
will appear in the LCD display and the Set Button
F
will remain illuminated in red. Press the
⁄
/
¤
Navigation Button n until PUNCH-
THROUGH appears on the bottom line of the
LCD screen, as shown in Figure 48. Press the Set
Button
F
to enter the main punch-through
menu branch.
3. At the next menu screen, press the
⁄
/
¤
Navigation Button n until TRANSPORT
appears on the bottom line of the LCD screen, as
shown in Figure 59. Press the Set Button
F
to begin programming the remote for transport
punch-through.
Figure 59
4. The next display screen (Figure 60) is where you
select the device that will receive the punch-
through commands. In our example, that is the
TV button, as that is where we want the VCR’s
transport controls to be active. Press the
⁄
/
¤
Navigation Button n until the name of the
base device appears and then press the Set
Button
F
.
Figure 60
5. At the next display screen (Figure 61), you will
select the device whose transport commands will
be used. Press the
⁄
/
¤
Navigation Button
n until the desired device name appears to the
right of the device in use. In our example, that is
the VCR. When the desired combination of devices
appears, press the
Set Button
F
.
Figure 61
6. When the Set button is pressed, the display will
change to show you that the new combination of
control commands is being saved to the unit’s
memory, as shown in Figure 62. The word
SAVED will flash four times and then the remote
will return to normal operation.
Figure 62
7. Once the punch-through is programmed, the
transport buttons of the second device named
will be used when those buttons are pressed while
the master device is in use.
Returning the Transport Control Settings to
Default Operation:
If you wish to remove the Transport Punch-Through so
that the transport commands are returned to the facto-
ry default setting, follow the steps shown above, except
that in Steps 4 and 5, select the same device for both
the
DEVICE IN USE on the left side of the bottom
line and the PUNCH-THROUGH device. In the
example used, the display to return the remote to
default settings will appear as shown in Figure 63.
Figure 63
EzSet Configuration
Harman Kardon’s patented EzSet feature makes it easier
than ever to calibrate the output levels on your new
receiver for maximum playback accuracy. In addition to
automatically setting the levels, the AVR remote’s LCD
display allows the unit to be used as a direct read-out
SPL meter. Complete instructions for using the EzSet
features of the AVR remote are found on pages 24
through 26 of this owner’s manual.
In most cases you will find it easier to access the EzSet
capabilities directly by pressing the
SPL Select Button
g and following the menu prompts as detailed on
pages 24 – 25. However, there is one function of the
remote that is only available through the remote’s
menu system being described in this section.
To avoid having the calibration settings created with
EzSet changed accidentally, the remote allows you to
disable the
SPL Select Button g on the remote.
To de-activate the button, follow these steps:
1. Press and hold the Program Button
O
for
about three seconds while the message shown
in Figure 15 appears in the remote’s LCD
Information Display
2
. Release the button
when the red light under the Set Button
F
appears.
2.
The remote’s MAIN MENU message (Figure 16),
will appear in the LCD display and the Set Button
F
will remain illuminated in red. Press the
⁄
/
¤
Navigation Button n until SET SPKR LEV-
ELS
appears on the bottom line of the LCD
screen, as shown in Figure 64. Press the
Set
Button
F
to enter the main EzSet menu
branch.
Figure 64
3. At the next menu screen (Figure 65) press the
⁄
/
¤
Navigation Buttons n once so that
EZSET DISABLE appears in the lower line of
the LCD display.
Figure 65
4. Within five seconds, press the Set Button
F
to
disable the
SPL Select Button g. Once the
Set Button
F
is pressed the word EXITING
will flash four times in the lower line of the LCD
display and then it will return to normal operation.
Once these steps are completed, when the SPL
Select Button h is pressed the remote will show
EZSET DISABLE and it will not be activated.
SET SPKR LEVELS
EZSET DISABLE
MAIN MENU
SET SPKR LEVELS
PUNCH-THROUGH
TV< -TV
TV< -VCR [TRS]
SAVED
PUNCH-THROUGH
TV< -VCR
DEVICE IN USE
TV
PUNCH-THROUGH
TRANSPORT
PUNCH-THROUGH
VCR< -VCR
VCR< -CBL [CHAN]
SAVED
AVR 7200 OM 1/27/03 4:47 PM Page 44
… 44 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR7200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info