Bedienungsanleitung Harman Kardon AVR7300 (Seite 50 von 60) (Englisch)

502638

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

50 CONFIGURING THE REMOTE

CONFIGURING THE REMOTE

you must first press the Input Selectors d

for that button, and then press the Command or

Function key. Since we want to pro

gram a series

of events that occur each time the Power On

button is pressed, press the AVR button. In your

specific macro, this is the first command button.

Figure 47

7. The next display (Figure 48) and the subsequent

screens are where the actual macro programming

takes place. The words at the left side of the top

line of the display show the button that is being

programmed (e.g., the Power On Button

one of the Macro Buttons

) and the indica-

tion at the right side of the top line shows the

number of macro steps available of 20 possible

steps. Following the instructions on the remote’s

LCD screen, press the first key you wish to be

transmitted in the macro. In our example, we first

want the AVR 7300 to turn on, so the Power

Button

should be pressed.

Figure 48

8. Once the first command button for the macro has

been pressed, continue to press the buttons you

wish to be part of the macro, in the order they will

be used. Press each button within five seconds of

the last button, remembering to press the Input

Selector

when you are changing device

functions. As the buttons on the remote are

pressed,

the remote’s display screen will show the

steps in the macro as they are programmed

(Figure 49).

Figure 49

9. For our example, we first want the AVR Power

On button pressed, followed by the TV Power On,

followed by the Cable Box On, followed by the

selection of the Logic 7 mode. To do that, press

the buttons in this order:

• Power On

• VID 2/TV

• Power On

• VID 3/Cable

• Power On

• AVR

• Logic 7

As each button is pressed to enter it into the

macro, you will see the button names appear and

then scroll up on the LCD display as your confir-

mation of the key entry (Figure 49).

10. When all commands for the macro have been

entered, press the Set Button

to save the

macro. The display screen will show the button

to which the macro has been programmed and

the number of steps used, and the word SAVED

will blink four times in the lower line of the LCD

display. When the display returns to normal, the

macro has been entered and the remote is ready

for operation.

11. If a macro has been programmed into the Power

On Button

, it will play back anytime the

Power On button is pressed. As the macro plays,

you will see the steps appear in the remote’s LCD

display. Macros programmed into one of the four

discrete Macro buttons may be activated at any

time by pressing the appropriate button.

Erasing a Macro

Once a macro has been created and stored in the

AVR remote’s memory, you have the option of erasing

it. You may do this at any time by following these

steps:

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 21 appears in the remote’s LCD

Information Display

. Release the button

when the red light under the Set Button

appears.

2. The remote’s MAIN MENU message (Figure

22), will appear in the LCD display and the Set

Button

will remain illuminated in red. Press

the

⁄

Navigation Button

three times so

that MACRO appears on the bottom line of the

LCD screen, as shown in Figure 43. Press the

Set Button

to enter the main macro menu

branch.

3. At the next menu screen (Figure 50), press the

⁄

Navigation Button o until the bottom

line in the remote’s LCD display reads ERASE A

MACRO. Press the Set Button

to begin the

process of erasing a macro.

Figure 50

4. The next display screen (Figure 51) is where you

select which macro will be erased. Press the

⁄

Navigation Button o until the number

of the macro you wish to erase appears. For

this example we will erase the Power On macro

created in the previous section. When the name

of the macro to be erased appears, press the

Set Button

Figure 51

5. The word ERASED will flash four times in the

bottom line of the remote’s LCD display, and then

the display will return to its normal condition.

When that happens, the macro is erased and the

remote is returned to normal operation.

Read a Macro

To check the commands stored in the remote’s memory

for one of the buttons, follow these steps:

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 21 appears in the remote’s LCD

Information Display

. Release the button

when the red light under the Set Button

appears.

2. The remote’s MAIN MENU message (Figure

21), will appear in the LCD display and the Set

Button

will remain illuminated in red. Press

the

⁄

Navigation Button

three times so

that MACRO appears on the bottom line of the

LCD screen, as shown in Figure 43. Press the

Set Button

to enter the main macro menu

branch.

3. At the next menu screen (Figure 52), press the

⁄

Navigation Button o until the bottom

line in the remote’s LCD display shows READ A

MACRO. Press the Set Button

to begin the

process of reading a macro.

Figure 52

4. The next display screen (Figure 53) is where you

select the macro to be read. Press the

⁄

Navigation Button o until the name of the

macro you wish to read appears. For this example,

we will read back the Power On macro created in

a previous section. When the name of the macro

to be read appears, press the Set Button

Figure 53

5. As soon as the Set button is pressed, the first two

steps in the macro will be appear in the remote’s

LCD screen. You may then use the

⁄

Navigation Button o to step up or down

through the list of commands stored as the

macro. As you read the display, you will see Input

Selector Buttons

appear in brackets, (e.g.,

[AVR]). When the step in the macro is a func-

tion, navigation or any other button, it will appear

READ A MACRO

POWER ON

MACRO

READ A MACRO

ERASE A MACRO

POWER ON

MACRO

ERASE A MACRO

[AVR]

[AVR] POWER ON

POWER ON 00/20

SELECT KEY PRESS

SELECT A DEVICE

AVR

AVR7300(120v)-OM 6/14/04 9:15 AM Page 50

Harman Kardon AVR7300 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info