Bedienungsanleitung Harman Kardon AVR7300 (Seite 51 von 60) (Englisch)

502638

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

CONFIGURING THE REMOTE 51

CONFIGURING THE REMOTE

next to the bracketed read-out of the underlying

device (e.g., [AVR] POWER ON).

6. When you are finished reviewing the macro’s

contents, press the Set Button

to return

the remote to normal operation.

Punch-Through Configuration

Punch-through is a capability of the remote that

allows the Volume controls, Channel Up/Down buttons

or Transport keys (Play, Stop, Record, Fast Forward

and Reverse, and Skip Up/Down) to link to a different

device. For example, if your TV, cable box or satellite

receiver is connected through the AVR 7300, you will

most likely want to use the AVR 7300’s volume con-

trol commands even when the remote has been set

to issue all other commands for the video device.

“Punch-through” enables you to easily program the

remote to do this.

Volume Punch-Through

Follow these steps to enable the Volume Up/Down

and Mute controls from one device to be used when

the remote is otherwise programmed for a different

device.

NOTE FOR VOLUME PUNCH-THROUGH: The

remote’s default settings are for the AVR 7300’s vol-

ume controls, to be used when any input or device is

selected, with the exception of the VID 2/TV button.

There is no need to program the remote for volume

punch-through for the AVR 7300’s controls with other

sources, such as DVD. To have the AVR 7300’s vol-

ume commands used when the TV device is selected,

follow these steps:

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 18 appears in the remote’s LCD

Information Display

. Release the button

when the red light under the Set Button

appears.

2. The remote’s MAIN MENU message (Figure

22), will appear in the LCD display and the Set

Button

will remain illuminated in red. Press

the

⁄

Navigation Button o until

PUNCH-THROUGH appears on the bottom

line of the LCD screen, as shown in Figure 54.

Press the Set Button

to enter the main

punch-through menu branch.

Figure 54

3. At the next menu screen (Figure 55), press the

Set Button

to begin programming the

remote for Volume punch-through.

Figure 55

4. The next display screen (Figure 56) is where

you select the device that will receive the punch-

through commands. In our example, that is the

VID 2/TV button, as that is where we want the

AVR 7300’s volume controls to be active. Press

the

⁄

Navigation Button o until the

name of the base device appears and then press

the Set Button

Figure 56

5. At the next display screen (Figure 57), you will

select the device whose Volume Up/Down and

Mute commands will be used. Press the

⁄

Navigation Button o until the desired device’s

name appears to the right of the device in use. In

our example, that is the AVR 7300 (indicated by

AVR). When the desired combination of devices

appears, press the Set Button

Figure 57

6. When the Set button is pressed, the display will

change to show you that the new combination of

control commands is being saved to the unit’s

memory, as shown in Figure 58. The word

SAVED will flash four times and then the remote

will return to normal operation.

Figure 58

7. Once the punch-through is programmed, the

Volume Up/Down and Mute buttons of the second

device named will be used when those buttons

are pressed while the master device

is in use.

Returning the Volume Control Settings to

Default Operation

If you wish to remove the Volume punch-through so

that the commands for Volume and Mute are returned

to the factory default setting, follow the steps shown

above, except that in Steps 4 and 5, select the same

device for both the DEVICE IN USE on the left

side of the bottom line and the PUNCH-THROUGH

device. In the example used, the display to return the

remote to default settings will appear as shown in

Figure 59.

Figure 59

Channel Punch-Through

Channel punch-through allows the Channel Up/Down

buttons to send commands to a different device than

the one that has been selected for other commands.

For example, you may wish to use a cable box or

satellite receiver as the source for a VCR, so you

would

want the Channel Up/Down Buttons Y to

transmit commands to the cable box even though the

other button commands are programmed to operate

the VCR.

To program the remote for channel punch-through,

follow these steps. This example will show how to pro-

gram channel punch-through so that the commands

programmed for Channel Up/Down for the VID 3/

Cable device will be transmitted when the VID 1/VCR

device has been selected as the current device.

1. Press and hold the Program Button

for

about three seconds while the message shown

in Figure 21 appears in the remote’s LCD

Information Display

. Release the button

when the red light under the Set Button

appears.

2. The remote’s MAIN MENU message (Figure

22), will appear in the LCD display and the

Set Button

will remain illuminated in red.

Press the

⁄

Navigation Button o until

PUNCH-THROUGH appears on the bottom

line of the LCD screen, as shown in Figure 54.

Press the Set Button

to enter the main

punch-through menu branch.

3. At the next menu screen, press the

⁄

Navigation Button o until CHANNEL

appears on the bottom line of the LCD screen,

as shown in Figure 60. Press the Set Button

to begin programming the remote for

channel punch-through.

Figure 60

4. The next display screen (Figure 61) is where you

select the device that will receive the punch-

through commands. In our example, that is the

VID 1/

VCR button, as that is where we want the

cable box’s channel controls to be active. Press

the

⁄

Navigation Button o until the

name of the base device appears and then

press the Set Button

Figure 61

5. At the next display screen (Figure 62), you will

select the device whose Channel Up/Down com-

mands will be used. Press the

⁄

Navigation

DEVICE IN USE

VCR

PUNCH-THROUGH

CHANNEL

PUNCH-THROUGH

TV< -TV

TV< -AVR [VOL]

SAVED

PUNCH-THROUGH

TV< -AVR

DEVICE IN USE

PUNCH-THROUGH

VOLUME

MAIN MENU

PUNCH-THROUGH

AVR7300(120v)-OM 6/14/04 9:16 AM Page 51

Harman Kardon AVR7300 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info