Bedienungsanleitung Harman Kardon BDS 375 -SET (Seite 15 von 38) (Englisch)

537901

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

BDS

Preparing the Remote Control

and Setting Up the Receiver

1. Press and hold the source button for the main device the remote will be operating.

The button will light up, go dark and then light up again. Release the button.

2. Select the type of punch-through programming.

a) For “punch-through” channel control, press the Channel + button.

b) For “punch-through” transport control, press the Play button.

3. Press the Aux button. The original source button will ﬂash to conﬁrm operation.

You can repeat Step 1 – Step 3 for any of the remote’s source buttons (Disc, Radio, etc.).

NOTE: “Punch-through” channel and transport commands will override the existing

commands for those buttons in the source modes you program.

To undo “punch-through” programming, follow the same steps as above, but press the

same source button in Step 1 and Step 3.

Erasing a Learned Code and Restoring the Original Button Code

1. Press and simultaneously hold down the Aux and Bookmark (Green) buttons on

the BDS remote control for at least three seconds. The BDS remote will enter the

learning mode after the Aux button LED turns on.

2. Press and release the remote control button that you want to erase. The Aux button’s

LED will ﬂash three times.

3. To erase other buttons, press the selected buttons.

4. To exit the erase mode, press Aux button.

Resetting the Remote to Factory Default Condition

1. Press and simultaneously hold down the Aux and Thumbnail (Yellow) buttons on the

BDS remote control for at least three seconds.

2. The Aux LED will ﬂash three times and exit learn-erase mode. Note: By erasing all

learned codes, all of the BDS remote buttons will return to their original functions.

Controlling an Apple TV

If you have connected an Apple TV to the BDS receiver’s HDMI 3 input, you can also use

the BDS remote to control an Apple TV that is streaming audio and video ﬁles stored

on your home network, or accessing media from an Internet service such as Netﬂix, as

shown in the illustration below.

Button

Cursor Right Button

OK Button

Up Button

Right Button

Play/Pause Button

Cursor Left

Button

Left Button

Down

Button

Play/Pause

Button

Select any other input source to return the BDS remote to its normal operation.

Using the Remote After it is Programmed

Pressing the remote’s Aux Input button will put the remote into the auxiliary-control mode,

and it will control the auxiliary component(s) via the codes you have programmed into it.

To switch the remote back to the BDS receiver-control mode from the auxiliary-control

mode, press any of the other Input buttons or the Home button.

Setting Up the Receiver

NOTE: The menu screens shown in this manual are for illustrative purposes and may

differ somewhat from the actual displays.

To set up your BDS receiver, you will use the remote to navigate through all of the on-

screen menus and to make selections from them.

• Use the Cursor Up/Down buttons to navigate through the menu list. When an item is

highlighted, a border will appear around it.

• To select a highlighted item, press the OK button. The screen will change depending

on your selection.

• To return to the previous screen, press the Previous button.

Initial Setup

When you turn your BDS receiver on for the ﬁrst time, the on-screen menu will display

the Initial Setup screen. The ﬁrst screen lets you set the language you want the BDS

receiver to use.

Initial Setup

Please select which language you would like the

BDS menus to appear in.

Step 1/6

After you set the language, press the OK button and the Initial Setup introduction screen

will appear.

Initial Setup

Welcome to the Harman Kardon BDS setup wizard.

Some simple information is needed to ensure you

get the best experience from your product.

You can adjust these settings later in addition to making

changes to more advanced settings by selecting 'Settings;'

from the Home menu.

Step 2/6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon BDS 375 -SET Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon BDS 375 -SET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info