Bedienungsanleitung Harman Kardon HKTS 65BQ (Seite 8 von 12) (Englisch)

534543

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

HKTS 65BQ

Connections

Satellite and Center Speaker Connections

CAUTION: Before making speaker connections, be sure that your receiver or

amplier is turned OFF and its AC cord is unplugged from the AC power outlet.

Speakers and receivers/ampliers have corresponding (+) and (–) connection terminals.

Most electronics makers use red to denote the (+) terminal and black for the (–) terminal.

Newer Harman Kardon receivers conform to the CEA standard and use specic colors to

denote the (+) terminals of the speaker positions. See the table in Color-Coding System,

on page 4.

Each speaker wire included with your system has colored bands at both ends of the (+)

conductor that correspond with the colors dened by the CEA standard. This system

helps ensure that the speaker in each location is connected to the correct receiver or

amplier terminals. In addition to the colored bands at each end, each speaker wire’s (+)

terminal has ribs molded into its insulation to help you identify it.

FRONT

LEFT

FRONT

RIGHT

CENTER

SURROUND

LEFT

SURROUND

RIGHT

Front Left

Satellite Speaker

Surround Left

Satellite Speaker

Receiver/Ampliﬁer

White Colored

Band

Blue Colored

Band

Green Colored

Band

Red Colored

Band

Gray Colored

Band

Center

Speaker

Front Right

Satellite Speaker

Surround Right

Satellite Speaker

It is very important to connect each speaker identically: (+) on the speaker to (+) on the

receiver or amplier, and (–) on the speaker to (–) on the receiver or amplier. Miswiring

one or more speakers results in thin sound, weak bass and a poor stereo image. With the

advent of multichannel surround-sound systems, connecting all of the speakers in your

system correctly is very important to achieving the proper ambience and directionality of

surround-sound program material.

Connecting Satellite Speakers without the Supplied Bases

–

A) Push Down on Cap

to Open Hole

B) Insert Bare Wire

into Open Hole

C) Release Cap

to Secure Wire

Insert the conductor with the colored band into the speaker’s red (+) terminal, and insert

the other conductor into the speaker’s black (–) terminal.

IMPORTANT: Make sure the (+) and (–) bare wires do not touch each other or the other

terminal. Touching wires can cause a short circuit that can damage your receiver or

amplier.

Connecting Satellite Speakers with the Supplied Bases

1. Remove the speaker’s base (see Shelf Placement, on page 5).

2. Pass the speaker wire through the opening in the speaker’s base.

3. Connect the speaker wires as described above.

4. Reattach the speaker’s base, as shown in the illustration.

Subwoofer: Wireless Connection

WIRELESS

CODE

DC 5V

INPUT

SUBWOOFER/

LFE OUT

Power

Supply

AC Cord

Power

Supply

Use either

connector

LFE Cable

(supplied)

1. Connect the supplied LFE cable from your receiver’s or processor’s subwoofer output

to either of the transmitter unit’s Input connectors.

• If your receiver/processor does not have a dedicated subwoofer output but does have

a set of preamp-level (volume-controlled) line outputs, use a stereo audio cable (not

supplied) to connect them to both of the transmitter unit’s Input connectors

2. Connect the transmitter power supply to the Power connector, and into a working AC

outlet,

3. Set the Wireless Code switches on the transmitter unit and subwoofer to the same

position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon HKTS 65BQ Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info