Bedienungsanleitung Honda Fit - 2016 (Seite 63 von 75) (Englisch)

647978

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

118 | | 119

MAINTENANCEMAINTENANCE

TABLE OF CONTENTS

INDEX

VISUAL INDEX

VOICE COMMAND

INDEX

SAFETY

INFORMATION

CUSTOMER

INFORMATION

INSTRUMENT PANEL

SPECIFICATIONS

VEHICLE

CONTROLS

MAINTENANCE

AUDIO AND

CONNECTIVITY

HANDLING THE

UNEXPECTED

BLUETOOTH®

HANDSFREELINK®

DRIVING

HONDALINK™

NAVIGATION

Engine Coolant

Park the vehicle on level ground. Check the reserve tank and the coolant level in the

radiator. We recommend Honda Long Life Antifreeze/Coolant Type 2.

Checking the Reserve Tank

1. Check the amount of coolant in the reserve tank.

2. If the coolant level is below the MIN mark, add

the speciﬁed coolant until it reaches the MAX

mark.

3. Inspect the cooling system for leaks.

Adding Coolant

1. Make sure the engine and radiator are cool.

2. Turn the radiator cap counterclockwise and

relieve any pressure in the coolant system. Do

not push the cap down when turning.

3. Push down and turn the radiator cap

counterclockwise to remove it.

4. The coolant level should be up to the base of the

ﬁller neck. Add coolant if it is low.

5. Put the radiator cap back on, and tighten it fully.

6. Pour coolant into the reserve tank until it reaches

the MAX mark. Put the cap back on the reserve

tank.

If Honda antifreeze/coolant is not available, you may use another major brand

non-silicate coolant as a temporary replacement. Check that it is a high quality

coolant recommended for aluminum engines. Continued use of any non-Honda

coolant can result in corrosion, causing the cooling system to malfunction or fail.

Have the cooling system ushed and relled with Honda antifreeze/coolant as

soon as possible.

NOTICE

Reserve tank

MAX

MIN

Radiator cap

Removing the radiator cap while the engine is hot can cause the coolant to

spray out, seriously scalding you.

Always let the engine and radiator cool down before removing the radiator

cap.

WARNING

Pour the ﬂuid slowly and carefully so you do not spill any. Clean up any spills

immediately; they can damage components in the engine compartment.

NOTICE

Brake Fluid

The uid level should be between the MIN and MAX marks on the side of the

reservoir. We recommend using Honda Heavy Duty Brake Fluid DOT 3.

Pour the ﬂuid carefully.

If the uid level is at or below the MIN mark, have a

dealer inspect for leaks or worn brake pads as soon as

possible.

Window Washer Fluid

Check the amount of window washer uid by looking

at the reservoir. If the washer uid level is low, ll the

washer reservoir. Pour the washer ﬂuid carefully. Do not

overﬂow the reservoir.

Canadian models

If the washer uid level is low, the washer level

indicator appears (see page 27).

Do not use engine antifreeze or a vinegar/water solution in the windshield washer

reservoir. Antifreeze can damage your vehicle’s paint. A vinegar/water solution

can damage the windshield washer pump.

NOTICE

Washer reservoir

Brake uid marked DOT 5 is not compatible with your vehicle’s braking system

and can cause extensive damage.

NOTICE

MAX

MIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Honda Fit - 2016 Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info