Bedienungsanleitung HP Officejet 5500 series (Seite 131 von 140) (Englisch)

582774

131

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

reference guide

troubleshooting information

121

troubleshooting

I have difficulties

when sending faxes

and when receiving

faxes

(continued)

• Make sure you have correctly connected the HP Officejet to the

telephone wall jack, and correctly connected any additional

equipment and services that share the phone line with your

HP Officejet.

Use the 1-LINE port on the back of the HP Officejet to connect to

the wall jack, and use the 2-EXT port to connect any other

equipment, such as a PC modem or an answering machine. For

more information and connection diagrams, see fax setup on

page 91.

• Using a telephone line splitter can cause faxing problems. (A

splitter is two-cord connector that plugs into a wall jack.) Try

removing the splitter and connecting the HP Officejet directly to the

telephone wall jack.

• Check that the telephone wall jack has a working telephone line by

plugging in a phone and checking for a dial tone.

• Telephone lines with poor sound quality (noise) can cause faxing

problems. Check the sound quality of the telephone line by

plugging a phone into the wall jack and listening for static or other

noise. If you hear noise, turn off the Error Correction Mode (ECM)

feature on your HP Officejet and try faxing again. For information,

see use error correction mode on page 49. Also contact your

phone company to report the noise problem on your line.

• Other equipment using the same telephone line as the HP Officejet

might be in use. For example, you cannot use your HP Officejet for

faxing if an extension phone is off-hook, or if you are using your PC

modem to e-mail or access the Internet.

• If you are using a digital subscriber line (DSL), make sure that you

have a DSL filter connected or you will not be able to fax

successfully. Obtain a DSL filter from your DSL provider. The DSL

filter removes the digital signal that blocks your HP Officejet from

communicating properly with the telephone line. For information on

how to connect the DSL filter, see faxing from a DSL line on

page 106.

• Check for error messages on the front panel display of your

HP Officejet. Until a product error condition is resolved, you will not

be able to send or receive faxes. For information on resolving error

conditions, see the hp officejet 5500 series troubleshooting section

in the onscreen hp photo & imaging help that came with your

software.

• If you are using either a PBX or an ISDN converter, make sure the

HP Officejet is connected to the port that is designated for fax and

phone use.

Note that some ISDN systems allow you to configure the ports for

specific phone equipment—for example, you might have assigned

one for telephone and Group 3 fax and another for multiple

purposes. If you continue to have problems when connected to the

fax/phone port, try using the port designated for multiple purposes

(might be labeled “multi-combi” or something similar).

problem possible cause and solution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HP Officejet 5500 series Seite 131

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von HP Officejet 5500 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info