Bedienungsanleitung I-onik WS-209 (Seite 4 von 6) (Deutsch, Englisch)

521902

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

6 7

English

Please keep these instructions in a safe place for future reference.

1. Introduction

The i.onik

Outdoor Bell Box:

• It is designed to be tted to the front of the property in a highly visible position, providing a perma-

nent visual deterrent to intruders. If the i.onik

Alarmsystem Smart Panel is triggered the siren will

sound and the strobe light will ash.

• It has a typical battery life of 2 years or more before they need changing.

• It is tamper protected. Any unauthorized tampering with the bell box will result in an alarm. This

feature can be turned off by the user when a battery change is required.

• It’s alarm duration is adjustable. The user may choose the alarm to sound from 1 to 10 minutes

when it triggered.

2. Location

Work out the best places to locate the bell box for maximum protection. Having chosen the locations

do not mount at this stage.

The bell box should be placed:

• on the outside of the property and within range of the i.onik

Alarmsystem Smart Panel (please test

before proceeding with installation).

• away from extreme temperature sources (radiators, ovens, stoves etc) and large metal objects that

could interference with wireless performance.

3. Installation

The easiest way to get to know the system and get it up and running quickly is to get all the devices

and accessories programmed on a table top before locating and mounting them. You will need the

following devices to complete the set up:

You may contact the local distributor to purchase the full security kit.

3.1 First Time Installation:

a. Remove the bell box cover by unscrewing the single screw located on the lid.

b. Insert 4x fresh alkaline ‘D’ cells, noting their polarity.

c. Set the house security code same as the Smart Panel by moving the “house security code pro-

gramming” switches (refer to “House Security Code Settings section”)

d. Set the alarm duration between options 1/3/5/10 minutes by moving the “alarm duration program-

ming” switches (at least choose 1 option).

e. Turn the power switch to ON, all blue lights will be ON indicating the tamper protection is disabled.

f. Press the learn button to enrol the remote of i.onik

Alarmsystem into the bell box.

g. Completing the remote’s enrollment by pressing button on the remote of i.onik

Alarmsystem.

The bell box beeps and ashes once enrollment successeded.

h. Press the learn button to complete the enrollment.

i. The bell box is now ready for mounting. Do not replace the cover yet.

3.2 Mounting the Bell Box

Before mounting the bell box ensure that the tamper protection is disabled as described below.

a. All blue LED lights are ON. If not, you will need to disable the tamper protection using the remote

of i.onik

Alarmsystem. Press buttons at the same time for 2 seconds.

The tamper protection is now disabled for 1 hour.

If more time is required, simply repeat the step above.

b. Ensure the tamper switch is fully depressed when

the siren is mounted. If there is a gap, pack with a

suitable spacing material.

c. Using the large screws and wall plugs provided, mount on the desired wall through the mounting

holes.

d. Fix the bell box cover with the securing screw.

ON KIQ

OFF

10M

HOUSE CODE

ALARM

DURATION

DC Power jack

House security code

programming switch

Alarm duration

programming switch

Learn button

BATTERY COMPARTMENT

4 X D CELLS

4xFixing Screws

Power button

Tamper switch

Important! Before mounting it is

important to disable the tamper

protection to avoid the bell box

sounding an alarm.

Enter/Exit change

battery mode

WS-201TX Key Fob remote

(It is either included in the

WS-100 security kit or you may

purchase it seperately)

Spring compressed

firmly against wall

Bottom of

the Bell box

Spring Guide

Wall

Smart Panel

(This is not included in this kit)

Key fob remote control

(This is not included in this kit)

Bell Box

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

I-onik WS-209 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info