12346
85
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
72
8
SCANS
2001 NEW
F scan operation and Fine F scan
F scan searches for signals within the specified
range with the displayed VFO or memory channel fre-
quency as for center frequency. The frequency range
is specied by the span.
q Push [V/M] to select VFO mode or memory mode,
as desired.
w Set center frequency of the F scan.
e Push [MENU] to select M2.
r Push [F1 SCN] to select the scan menu.
See p. 68 for scan condition.
If the [RF/SQL] control function is set as AUTO, the
squelch is always open in SSB, CW and RTTY modes.
t Set the F span by pushing [F4 SPN].
±5 kHz, ±10 kHz, ±20 kHz, ±50 kHz, ±100 kHz,
±500 kHz and ±1 MHz are selectable.
y Push [F2 F] to start the F scan.
Decimal points blink while scanning.
u When the scan detects a signal, the scan stops,
pauses or ignores it depending on the VSC, resume
setting and the squelch condition.
i Push [F2 F] to cancel the F scan.
Rotating the tuning dial during scan also cancels scan
operation.
DD
About the Fine
F scan
During F scan, when a signal is received, scan con-
tinues, but the tuning step is temporarily set to 10 Hz.
q Follow steps q to y above to start programmed
scan.
w During F scan, push [F3 FIN] to switch between
F scan and ne F scan operation.
e Push [F2 F] to cancel the scan.
Rotating the tuning dial during scan also cancels scan
operation.
Keypad
Tuning dial
[MENU]
[V/M]
F 1
F
2F
3
F
4
F
5
F 1
F 2 F 3 F 4 F 5
F 1
F
2F
3
F
4
F
5
SCN
MEM
SWR
TCN
VSC
PRO
F
FIN
SPN
SET
F:±1Ok
PRO
F
FIN
SPN
SET
F
SCAN
Push [F1]
Push [F2] to start/cancel the scanning.
Push [F2]
Push [F4] to select the span.
F 1
F
2F
3
F
4
F
5
F 1
F
2F
3
F
4
F
5
PRO
F
FIN
SPN
SET
F
SCAN
PRO
F
FIN
SPN
SET
F-
F
SCAN
Push [F3] to switch
between programmed
scan and fine pro-
grammed scan.
IC-7400.qxd 02.4.2 11:35 Page 72
85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icom IC-7400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info