Bedienungsanleitung Indesit kp 648 vs b x o (Seite 20 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

324082

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

BURNER AND NOZZLE SPECIFICATIONS

* At 15°C and 1013 mbar-dry gas

Propane G31 H.s. = 50,37 MJ/kg

Butane G30 H.s. = 49,47 MJ/kg

Methane G20 H.s. = 37,78 MJ/m

1elbaTsagdiuqiLsaglarutaN

renruBretemaiD

)mm(

rewoplamrehT

)*.s.H(Wk

ssap-yB

001/1

)mm(

elzzoN

001/1

)mm(

*wolF

h/g

elzzoN

001/1

)mm(

*wolF

h/l

.nimoN.cudeR03G13G02G

CdipaR00100.37.00468812412611682

Bdipar-imeS5756.14.0034602181169751

AyrailixuA5500.13.0720537171759

DgnirelpirT03152.33.17519632232421903

ylppuS

erusserp

037302

THE APPLIANCE MUST BE EARTHED

The appliance is designed to work with alternating current

at the supply voltage and frequency indicated on the rating

plate (situated on the rear part of the appliance and on the

last page of the instruction manual). Make sure that the

local supply voltage corresponds to the voltage indicated

on the rating plate.

Connecting the supply cable to the mains electricity

supply

For models supplied without a plug, fit a standard plug,

suitable for the load indicated on the rating plate, onto the

cable and connect it to a suitable socket.

To connect directly to the mains supply, an omnipolar circuit-

breaker with a contact separation of at least 3 mm suitable

for the load and complying with current standards and

regulations must be fitted between the appliance and the

mains supply outlet.

The yellow-green earth wire must not be interrupted by

the switch.

The supply cable must be in such a position so that no

part of it can reach a temperature of 50 °C above room

temperature.

All appliances should be connected seperately.

Do not use reducers, adapters or shunts as they could

cause heating or burning.

Before connecting to the power supply, make sure that:

• the limiter valve and the domestic system can withstand

the load from the appliance (see rating plate);

• the supply system is efficiently earthed according to

standards and laws in force;

• the socket or omnipolar circuit-breaker are easily

accessible when the appliance is installed.

FAILURE TO OBSERVE THE ACCIDENT-PREVENTION

REGULATIONS RELIEVES THE MANUFACTURER OF ALL

LIABILITY.

Replacing the cable

Use a rubber cable of the type H05VV-F with a cross section

of 3 x 1,5 mm² .

The yellow-green earth wire must be 2 ÷ 3 cm longer than

the other wires.

ELECTRICAL CONNECTION

This appliance conforms to the following European Economic

Community directives:

- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent

modifications;

- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and

subsequent modifications;

- 90/396/EEC of 29/06/90 (Gas) and subsequent modifications;

- 93/68/EEC of 22/07/93 and subsequent modifications.

TECHNICAL SPECIFICATIONS

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens

Norm EN 50304

Energy consumption for Natural convection

heating mode: Convection ( only for mod. KP 688 MS)

Declared energy consumption for Forced convection Class

heating mode: Fan assisted

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit kp 648 vs b x o Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info