Bedienungsanleitung Jablotron JA-80K (Seite 3 von 22) (Englisch)

554835

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Installation manual: Oasis security system JA-80K - 3 - MKE51801

System installation shall only be undertaken by qualified

technicians holding a training certificate issued by an authorized

distributor. The manufacturer cannot be held responsible for any

damage or consequences related to the improper or incorrect

use of this product.

1. Control panel architecture

• The control panel has 50 addresses (01 to 50), meaning that

up to 50 wireless devices can be enrolled i.e. detectors,

keypads, keyfobs, sirens etc.

• When triggered, a detector sends a so-called natural signal

which dictates what the reaction of the control panel should

be. E.g. the natural signal of a door contact or PIR detector

can be an instant or delayed alarm which is selectable by a

DIP switch inside the detector. A keyfob, for instance, sends

signals for set (arm), unset (disarm) and panic.

o The control panel is factory-set to perform natural reactions

according to the signals sent from wireless devices. By

programming the addresses of the devices in the control

panel, it is possible to define how the control panel reacts to

individual wireless devices. E.g. a door detector assigned to

address 15 could trigger a panic reaction, and a keyfob

button using address 24 could cause a fire reaction etc.

• Wireless devices can be assigned to 3 sections: A,B or C.

Assignments to sections either have an effect when partial

setting is used e.g. only A is set, AB is set, or ABC is set

(which, for example, would be suitable for homes where A

could mean afternoon setting, AB night setting and ABC total

setting), or if the system was split into two independent

partitions A and B, with a common section C. In the second

case, each A or B section can be set individually, and C is

automatically set when both A and B have been set by users.

This would be suitable for two independent families in a single

house, or two companies in one building.

• There are two hard-wired inputs with programmable functions

assigned to addresses 01 and 02. If these two inputs are not

used, the two addresses can be used to enroll wireless

devices. Hard-wired inputs are also provided by some

wireless devices, such as keypads, door detectors, and PIR

movement detectors.

• The control panel has two alarm outputs: IW = internal

(indoor) warning and EW = external (outdoor) warning. Both

these signals are also available as wireless signals.

• There are two programmable outputs in the control panel,

PGX and PGY whose functions can be configured. The PG

outputs are not only available as physical control-panel

terminals, but also as radio signals for the control of UC and

AC receiver outputs.

• The system can be operated by user codes or user cards. The

system can recognise up to 50 different users. The system

can also be operated by wireless keyfobs, and if the control

panel is equipped with a suitable communicator it can also be

remotely controlled by mobile phone or the Internet.

• It is possible to program different reactions to access codes or

access cards and if the system is split, it is possible to

program which part of the building is accessible by a particular

code or card. Each of the possible 50 users can have his own

4-digit access code and/or access card. Setting (arming) and

unsetting (disarming) is possible by card or code, and if a

higher security level is needed it is possible to make it

compulsory to confirm the validity of a card by code entry.

• Programming the system is possible by Oasis keypads such

as the wireless JA-80F or the hard-wired JA-80E, and also by

computers running ComLink software. Further options offer

programming by mobile phone or the Internet.

• There is a power supply in the control panel and space for a

12V, 1.3 to 2.6 Ah

back-up battery.

• To connect a hard-wired keypad or a computer, the control

panel is equipped with a digital bus provided by terminals and

RJ connectors.

• The control panel can be equipped with an optional

communicator to provide external communications to the

system. The JA-80Y GSM/GPRS communicator or JA80-

V LAN and phone line communicator both allow data to be

Communicator

Main board

Transformer

Back-up battery

Mains terminal

Digital bus connector

GSM antenna

tamper switch

SIM card

LEDs

Antenna

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron JA-80K Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron JA-80K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info