Bedienungsanleitung JBL Cinema BD100 (Seite 19 von 31) (Englisch)

810185

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

www.jbl.com

English

4. Use the Cursor Left and Cursor Right buttons to set the distance you

measured for the speaker. (The arrowheads indicate which speaker is

being adjusted.) The distances are in meters. Each .3 meters equals 1

foot.

5. Press the “Clear/Exit” button twice to return to the speaker-setup

screen and select the next speaker distance to be adjusted.

6. Repeat steps 2 – 5 for each speaker until you have adjusted the

distance to all the loudspeakers in your 5.1-channel speaker system

(except the subwoofer).

7. After you have entered all the distances, press the “Clear/Exit” button to

return to the Level screen.

NOTE: Leave all the speaker levels set at “0” for now. You will be able to

adjust the individual speaker levels once your system is set up and you’re

playing music or lms. See Adjusting Individual Speaker Volumes, on

page 20.

INFORMATION MENU

Software Version: BD100 V24.24.06

MAC : 00 -1C -50 -00 -D8 -9B

System Information

The Information menu will display the receiver’s software/rmware version

number and the receiver’s factory-assigned network MAC address. This

screen is for information only and has no user adjustments.

using The ReCeiVeR

NOTE: Before using your new BD receiver, be sure to set the speaker

distances, as explained in Audio Settings: Speaker Settings, on page 18.

HOME MENU

Press the Home button to display the Home Menu screen:

DLNA Search

Pandora

Picasa

YouTube

FM Radio

Bluetooth

Input

Home Menu

The available sources are listed on the left.

If a disc has been inserted into the receiver’s built-in disc slot, it will appear

on the list as either “CDDA” (CD), “DVD Video” (DVD) or “Blu-ray Disc.” If

you have inserted a USB device into the receiver’s USB port, it will appear

on the list as “USB.”

Digital and analog audio sources connected to the receiver’s rear-panel

digital and line inputs can be accessed by selecting “Input” from the source

list (see Listening to Audio Sources, on page 24).

To select a source from the list, use the Cursor Up/Down buttons to

highlight the desired source, then press the Enter button to select it. You

can also select sources by pressing the four Source buttons on the remote.

DISC

MUTE

VOL+

VOL–

CH+

CH–

SETUP

HOME

ENTER

TOP MENU

POP-UP MENU

CLEAR/EXIT

REPEAT

A–B

PROGRAM

BOOKMARK THUMBNAIL

ZOOM

SUBTITLE

AUDIOSURR

OPTIONS

DISPLAY

123

456

RADIO

STREAM

SOURCE

Source

Buttons

• Disc: Selects the receiver’s built-in disc player.

• Radio: Selects the receiver’s built-in FM tuner.

• Stream: The rst press of this button selects the last-used source among

the following: Bluetooth, YouTube, Picasa, Pandora, DLNA. Subsequent

presses advance through the sources in order. (Note: YouTube, Picasa

and Pandora streaming services are region-dependent.)

• Source: The rst press of this button selects the last used digital or

analog source connected to the receiver’s rear-panel optical, coaxial,

HDMI ARC, HDMI 1 (BD300 only), HDMI 2 (BD300 only) and Aux inputs.

Subsequent presses advance through the inputs in order.

To use the Playlist function, see Using Playlists, on page 27.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Cinema BD100 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info