Bedienungsanleitung JBL Cinema BD100 (Seite 20 von 31) (Englisch)

810185

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

ADJUSTING INDIVIDUAL SPEAKER VOLUMES

You can adjust the volumes of the system’s individual speakers while you’re

listening to audio playback sources.

1. Press the Setup button and use the Cursor Right button to select Audio

Settings.

Audio Output

Speaker Settings

Test Tone More ...

Audio Settings

2. Use the Cursor Down button to select “Speaker Settings” and then

press Cursor Right to select “Test Tone” and again to select “More.”

Audio Output

Speaker Settings

Audio Settings

SUB

LS RS

3. The BD receiver will now output test noise through each of the

loudspeakers in the following order: Left (L), Center (C), Right (R), Right

Surround (RS), Left Surround (LS) and Subwoofer (SUB).

4. Press Enter when the loudspeaker you want to adjust is highlighted. The

Level/Distance selections will appear.

Audio Output

Speaker Settings

Audio Settings

LS RS

Level

Distance

5. Press Enter to adjust the level of the speaker.

Audio Output

Speaker Settings

Audio Settings

LS RS

6. Use the Cursor Left and Cursor Right buttons to change the speaker’s

volume level.

7. Press Enter to store the modied settings in the BD receiver’s memory;

press Clear/Exit twice to return to the previous screen and select

another speaker channel.

8. Press Setup or Home to exit from the Level Setup screens.

Notes on Setting Speaker Volumes in 5.1-Channel Systems:

While setting your system’s individual speaker volume levels is ultimately up

to your personal taste, here are some ideas you may nd helpful:

• For lms and video-music programs, your overall goal should be to

create an enveloping, realistic sound eld that draws you into the lm or

music program without drawing your attention away from the action on

the screen.

• For multichannel music recordings, some music producers will create a

sound eld that places the musicians all around you; others will create

a sound eld that places the musicians in front of you, with more subtle

ambience in the surround speakers (as you would experience in a

concert hall).

• In most 5.1-channel lms, the surround channels are not intended to

be as loud or as active as the front channels. Adjusting the surround

speakers so they are always as loud as the front channels could make

dialogue difcult to understand and will make some sound effects

sound unrealistically loud.

Notes on Setting Subwoofer Volume:

• Sometimes the ideal subwoofer volume setting for music is too loud for

lms, while the ideal setting for lms is too quiet for music. When setting

the subwoofer volume, listen to both music and lms with strong bass

content, and nd a “middle ground” volume level that works for both.

• If your subwoofer always seems too loud or too quiet, you may want

to place it in a different location. Placing the subwoofer in a corner will

always tend to increase its bass output, while placing it away from any

walls or corners will always tend to lessen its bass output.

IMPORTANT: Do not turn the receiver’s volume up to or past the

point where the audio from the speakers becomes distorted.

Doing so can damage the speakers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBL Cinema BD100 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info