Bedienungsanleitung JBSystems MCD150 (Seite 4 von 27) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

468055

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

ENGLISH OPERATION MANUAL

JB SYSTEMS

3/49 MCD150

 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding

temperatures when bringing it into a warm room after transport. Condense sometimes

prevents the unit from working at full performance.

 Choose the place where you put your installation very carefully. Avoid presence of heat

sources. Avoid places with vibrations or places that are dusty and humid.

 The player will work normally when installed on a surface with max. 15° inclination.

 Be very careful while handling CDs, do not touch them with wet or dirty hands.

 Discs that are dirty must be cleaned with special designed cloth and cleaning products.

 Do not use CDs that are badly damaged (scratched or deformed) they can damage your

appliance.

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

 In order to prevent electric shock, do not open the top cover. If a problem occurs, contact

your dealer.

 Do not place metal objects or spill liquid inside the CD player. Electric shock or

malfunction may result.

 This CD player uses the semiconductor laser. To allow you to enjoy music at a stable

operation, it is recommended to use this in a room of 5°C – 35°C.

 The compact disc player should not be adjusted or repaired by anyone except properly

qualified service personnel.

 This unit may cause interference to radio and television reception.

CLEANING THE CD-PLAYER:

Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside

the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit.

CONNECTIONS

 Use the supplied cinch cable to connect the audio output of the CD player with a CD

input on your mixing unit.

 Also connect the fader start cable if your audio mixer has fader start connections.

(Synq® or Pioneer® compatible)

 Connect the mains cable.

ENGLISH OPERATION MANUAL

JB SYSTEMS

4/49 MCD150

CONTROLS AND FUNCTIONS

1. CD ACCESS DOOR: Used to load and unload the CDs. Use the eject button (3) to

open the cover and simply close it by hand.

2. STOP BUTTON: Stops playback immediately. Use this button AT ALL TIMES before

opening the CD access door!

3. EJECT BUTTON: Press this button to open the CD access door.

Important: always stop playback first, by pressing the STOP button (2), before using

the EJECT button!

4. SGL/CTN Button: With this button you can choose between “single track mode” and

“continuous play”.

 Continuous play: The complete CD will be played without interruption. (mostly

used in pubs)

 Single track: Player stops at the end of each track and waits at the beginning of

the next track. The player waits at the first music note of each track. This means

that badly indexed CDs will not interfere with the instant start capabilities of this

CD player. This is a very useful feature for deejays!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBSystems MCD150 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info