Bedienungsanleitung JBSystems MCD150 (Seite 6 von 27) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

468055

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

ENGLISH OPERATION MANUAL

JB SYSTEMS

7/49 MCD150

 PLAYING CD-R and CD-RW:

Apart from normal audio CD’s the MCD150 can play both CD-R (CD recordable) and

CD-RW (CD rewriteable). Please note that you should always use the “disc at once” and

“track at once” disc writing options! Burning your CD’s at speeds higher than 12x can

cause reading errors. If the disc is multi session, it will only play the first session:

 if the first session is CD-DA you can only play CD-DA tracks.

 if the first session is MP3 you can only play MP3 files.

 SLEEP MODE:

The CD player automatically shuts off the transport and laser after about 15 minutes

(when in pause or cue mode). This extends the life of your motor drive and laser. During

sleep mode the display shows the word “SLEEP”. To wake up the player, just press the

cue or play button, the display turns to normal and is ready to receive instructions.

 CREATE A LOOP:

While a track is playing, press IN/R.CUE button to program the starting point of the loop.

Now press the OUT/EXIT button to program the endpoint of the loop. The seamless loop

starts playing at once. (With some practice you will be able to create perfect loops!)

While the loop is playing, you can press the OUT/EXIT button again to exit the loop and

continue the rest of the track.

It is possible to program a new loop, even when the current loop is still playing. While the

loop is playing, simply press the IN/R.CUE button to set the starting point of the new

loop. Now enter the endpoint by pressing the OUT/EXIT button. Your new loop is

programmed and playing.

 RESTART A LOOP:

This can be done in 2 ways:

 When a loop is programmed and you left it by pressing the OUT/EXIT button, just

press this button again to restart the loop.

 When the loop is still playing, press the CUE button to restart the loop immediately.

You can repeat this several times to create a “Stutter” effect.

 STORING A CUE POINT:

There are 2 ways to set a cue point:

 Press the IN/R.CUE button during normal playback to set the new cue point (“CUE on

the fly”).

 Put the player in pause and use the search buttons (9) to search for the exact

location for the cue point. Once this location is found, press “IN/R. CUE” button to set

the new cue point. (or press PLAY/PAUSE button)

Once the cue point is programmed, just press the CUE button to recall it.

 PITCH BENDING:

This function is used to put the beats of two tracks in perfect sync. The speed increases

or decreases respectively as long as the PITCH BEND+ or PITCH BEND- button is

pressed.

ENGLISH OPERATION MANUAL

JB SYSTEMS

8/49 MCD150

SPECIFICATIONS

Power Supply: AC 230 V, 50Hz

Power Consumption: 17W

Output level: 2,0Vrms +/-0.5dB @ 1kHz, 0dB

Frequencyresponse: 20-20.000Hz(+/-0,4dB)

THD + noise (20kHz LPF): 0,01% @ 1kHz, 0dB

S/N Ratio (IHF-A): 92dB @ 1kHz, 0dB

Short access time (next track): 2sec

Long access time (track 1  20): 4sec

LaserPickup: Sony KSM-213CCM 3spotdetection 780nm

Electronictracking: Full automatic digital tracking.

DISC FORMAT:

Possible file extensions: .mp3 ~ .MP3 ~ .mP3 ~ .Mp3

ISO9660: max. 63 character style

Joliet: max. 63 character style

CD-ROM sector format: mode-1 only

Max. Folders: 255

Max. Files: 999

MP3 FORMATS:

MPEG1Layer3 (ISO/IEC11172-3): mono / stereo sampled at: 32 - 44,1 - 48kHz

Bitrates: 32 – 320Kbps

Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)

MPEG2Layer3 (ISO/IEC13818-3): mono / stereo sampled at: 16 – 22,05 - 24kHz

Bitrates: 32 – 160Kbps

Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)

MPEG2,5 Layer3: mono / stereo sampled at: 8 – 11,025 - 12kHz

Bitrates: 32 – 160Kbps

Bitrate modes: CBR (Constant Bitrate) or VBR (Variable Bitrate)

Dimensions: 216(W) x 96(H) x 274(D) mm

Weight: 2,0kg

Every information is subject to change without prior notice

You can download the latest version of this user manual on our website: www.beglec.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JBSystems MCD150 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info