GLID 120
This mixing gives rudder actuation with aileron operation. When
opposite mixing direction is required, press the - key and
increase the mixing value to minus direction.
In Function Mode, use the UP and DN keys to select Aileron to
Rudder Mixing and access by pressing the UP and DN keys
simultaneously.
Selection of Operational Switch
The lever switch position for Mixing Function ON/OFF is listed
at right and can be accessed with the + or - keys. When the
applicable switch is in the OFF position, SW OFF flashes in the
left upper corner and increase or decrease mixing value is not
applicable. Press the CLR key to set ON.
Press the UP and DN keys
simultaneously to enter/exit
the Function Mode
Press the DN and Select keys
simultaneously to access the
Function Mode List Display
At rate, press to
increase/decrease
Mixing Value (± 125%)
At switch, press to
change switch
selection
Function Selection
→
Rates
→
Switch
→
Offset
Press to return the
Mixing Value to zero or
to return the active
Mixing Switch ON
To Aileron to Rudder
Mixing function
To Flap to Elevator
Mixing function
4.9 Flap to Aileron Mixing, cont
4.10 Aileron to Rudder Mixing (Function Mode)
ON Always On
MIX Mixing Switch Is Forward
FLP-D Flap Switch Down Position
FLP-U Flap Switch Up Position
Indicates the
function being
selected:
↓
Rate
↓
SW
SW OFF appears when the Flap Mixing
is in the middle or lower position
Flap to Aileron Mixing Value (± 125%)
Indicates current Mixing Switch acitvated
Flap Offset Value
