Bedienungsanleitung Juki DDL8700B-7 (Seite 30 von 51) (Englisch)

614555

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

– 28 –

8. Function setting list

No. Item Description Setting range Default

Ref.

page

1 Soft start function The number of stitches to be sewn at a low speed when the soft-start

function is used at the start of sewing.

(* This setting is enabled when the thread clamp function is in the OFF

state.)

0 : The function is not selected.

1 to 9 : The number of stitches to be sewn under the soft-start mode.

0 to 9

(Stitches)

2 Material end sensor

function

Material end sensor function.

0 : Material end detection function is not operative.

1 : After detecting material end, the specied number of stitches (No. 4)

will be sewn, and the sewing machine will stop.

0/1

3 Thread trimming

function by material end

sensor

Thread trimming function by material end sensor.

0 : Automatic thread trimming function after detection of material end is

not operative.

1 : After detecting material end, the specied number of stitches (No.

4) will be sewn, and the sewing machine will stop and perform auto-

matic thread trimming.

0/1

4 Number of stitches for

material end sensor

Number of stitches for material end sensor.

Number of stitches from detection of material end to stop of the sewing

machine.

0 to 19

(Stitches)

5 Flicker reducing function Flicker reducing function

0 : Flicker reducing function is not operative.

1 : Flicker reducing function is effective.

0/1

* 7 Unit of bobbin thread

counting down

Unit of bobbin thread counting down

0 : 1 Count/10 stitches

1 : 1 Count/15 stitches

2 : 1 Count/20 stitches

0 to 2

* 8 Sewing speed of re-

verse feed stitching

Sewing speed of reverse feed stitching is set.

150 to 3,000

(sti/min)

1 9 0 0

12 Optional switch function

selection

Switching of function of optional switch.

o P T _

* 13 Function of prohibiting

start of the sewing ma-

chine by bobbin thread

counter

Function of prohibiting start of the sewing machine by bobbin thread

counting

0 : When counting is out (-1 or less) Function of prohibiting start of the

sewing machine is not operative.

1 : When counting is out (-1 or less) Function of prohibiting start of the

sewing machine after thread trimming is operative.

2 : When counting is out (-1 or less), the sewing machine stops once.

Function of prohibiting start of the sewing machine after thread

trimming is operative.

0 to 2

15 Thread clamp function

at the start of sewing

Operation of the thread clamp at the start of sewing is set.

0 : Thread clamp does not operate

1 : Thread clamp operates

0/1

21 Function of automatic

presser foot lifting at

pedal's neutral position

Function of lifting presser foot when the pedal is in neutral position.

0 : Function of neutral automatic presser lifting is not operative.

1 : Selection of function of neutral presser lifting.

0/1

22 Needle up/down correc-

tion switch changeover

function

Function of the needle up/down correction switch is changed over.

0 : Needle up/down compensation

1 : One stitch compensation

0/1

25 Thread trimming oper-

ation after turning the

handwheel by hand

Thread trimming operation after moving the needle away from its upper

or lower position by turning the handwheel by hand is specied.

0 : Thread trimming operation is carried out after turning the handwheel

by hand.

1 : Thread trimming operation is not carried out after turning the hand-

wheel by hand.

0/1

* 27 Thread clamp sewing

speed

The sewing speed when the thread clamp operates is set.

100 to MAX

(sti/min)

3 0 0

29 Back-tack initial opera-

tion time

This function sets the suction time of initial motion of back-tack solenoid.

50 to 500

(ms)

2 5 0

30 Function of reverse feed

stitching on the way

Function of reverse feed stitching on the way

0 : Normal one-touch type reverse feed stitching function

1 : Function of reverse feed stitching on the way is operative.

(In the case the function of reverse feed stitching on the way is enabled,

function No. 26 cannot be used.)

0/1

31 Number of stitches of

reverse feed stitching on

the way

Number of stitches of reverse feed stitching on the way

0 to 19

(Stitches)

32 Effective condition of

reverse feed stitching on

the way when the sew-

ing machine is stopping.

Effective condition of reverse feed stitching on the way

0 : Function is not operative when the sewing machine stops.

1 : Function is operative when the sewing machine stops.

0/1

33 Thread trimming

function by reverse feed

stitching on the way

Thread trimming function by reverse feed stitching on the way

0 : Automatic thread trimming function after completion of reverse feed

stitching on the way is not operative.

1 : Automatic thread trimming after completion of reverse feed stitching

on the way is performed.

0/1

* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of

delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to

change the set value, please purchase the Engineer’s Manual and follow the instructions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Juki DDL8700B-7 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info