614555

Juki DDL8700B-7 Seite 31

31
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
– 29 –
No. Item Description Setting range Default
Ref.
page
* 35 Sewing speed at a low
speed
Lowest speed by pedal (The MAX value differs by machine head.)
150 to MAX
(sti/min)
2 0 0
* 36 Sewing speed of thread
trimming
Thread trimming speed (The MAX value differs by machine head.)
100 to MAX
(sti/min)
3 0 0
37 Sewing speed of soft-
start
Sewing speed at the start of sewing (soft-start) (The MAX value differs by
machine head.)
100 to MAX
(sti/min)
8 0 0
31
38 Sewing speed of one-
shot stitching
Sewing speed of one-shot stitching (The MAX value differs by machine
head.)
150 to MAX
(sti/min)
2 0 0 0
36
* 39 Operation-start pedal
stroke
The pedal position at which the sewing machine starts operation from the
neutral position of the pedal (Pedal stroke)
10 to 50
(0.1 mm)
3 0
* 40 Low speed section of
pedal
Position where the sewing machine starts accelerating from pedal neutral
position (Pedal stroke)
10 to 100
(0.1 mm)
6 0
* 41 Starting position of lifting
presser foot by pedal
Position where the cloth presser starts lifting from pedal neutral position
(Pedal stroke)
– 60 to –10
(0.1mm)
- 2 1
* 42 Starting position of
lowering presser foot
Starting position of lowering presser foot
Stroke from the neutral position
8 to 50
(0.1 mm)
1 0
* 43 Pedal stroke 2 for start-
ing thread trimming
Position 2 where the thread trimming starts from pedal neutral position
(When the function of lifting presser foot by pedal is provided.) (Pedal
stroke)
– 60 to –10
(0.1 mm)
- 5 1
* 44 Pedal stroke for
reaching the maximum
sewing speed
Position where the sewing machine reaches its highest sewing speed
from pedal neutral position (Pedal stroke)
10 to 150
(0.1 mm)
1 5 0
* 45 Corrected neutral posi-
tion of the pedal
The neutral position of the pedal sensor is set.
–15 to 15
(0.1 mm)
0
47 Auto-lifter selecting
function
Limitation time of waiting for lifting solenoid type auto-lifter device
10 to 600
(second)
6 0
36
* 48 Pedal stroke 1 for start-
ing thread trimming
Position where thread trimming starts from pedal neutral position (Stan-
dard pedal) (Pedal stroke)
– 60 to – 10
(0.1 mm)
- 3 5
49 Lowering time of presser
foot
Sets the time required until the lowering of the presser foot is completed
after a depress on the pedal.
0 to 500
(10 ms)
1 4 0
39
* 50 Pedal specication Type of pedal is selected.
0 : Presser foot is not operated by the pedal (KFL)
1 : Presser foot is operated by the pedal (PFL)
0/1
1
42
51 Compensation of
solenoid-on timing of
reverse feed stitching at
the start of sewing
Compensation of starting the solenoid for reverse feed stitching when
reverse feed stitching at the start of sewing is performed. – 36 to 36
(10°)
The setting
differs with the
machine head.
37
52 Compensation of
solenoid-off timing of
reverse feed stitching at
the start of sewing
Compensation of releasing the solenoid for reverse feed stitching when
reverse feed stitching at the start of sewing is performed. – 36 to 36
(10°)
The setting
differs with the
machine head.
37
53 Compensation of
solenoid-off timing of
reverse feed stitching at
the end of sewing
Compensation of releasing the solenoid for reverse feed stitching when
reverse feed stitching at the end of sewing is performed. – 36 to 36
(10°)
The setting
differs with the
machine head.
37
55 Foot lift after thread
trimming
Function of lifting presser foot at the time of (after) thread trimming
0 : Not provided with the function of automatic lifting of work-clamp after
thread trimming
1 : Provided with the function of lifting presser foot automatically after
thread trimming
0/1
1
38
56 Reverse revolution to lift
the needle after thread
trimming
Function of reverse revolution to lift the needle at the time of (after)
thread trimming
0 : Not provided with the function of reverse revolution to lift the needle
after thread trimming
1 : Provided with the function of reverse revolution to lift the needle after
thread trimming
0/1
0
38
58 Function of holding
predetermined upper/
lower position of the
needle bar
Function of holding predetermined upper/lower position of the needle bar
0 : Not provided with the function of holding predetermined upper/lower
position of the needle bar
1 : Provided with the function of holding predetermined upper/lower
position of the needle bar (Holding force is weak.)
2 : Provided with the function of holding predetermined upper/lower
position of the needle bar (Holding force is medium.)
3 : Provided with the function of holding predetermined upper/lower
position of the needle bar (Holding force is strong.)
0 to 3
0
38
59 Function of Auto/Manual
change-over of reverse
feed stitching at the start
of sewing
This function can specify the sewing speed of reverse feed stitching at
the start of sewing.
0 : The speed will depend on the manual operation by pedal, etc.
1 : The speed will depend on the specied reverse feed stitching speed
(No. 8).
0/1
1
38
60 Function of stop immedi-
ately after reverse feed
stitching at the start of
sewing
Function at the time of completion of reverse feed stitching at the start of
sewing
0 : Not provided with the function of temporary stop of the sewing ma-
chine at the time of completion of reverse feed stitching at the start
of sewing
1 : Provided with the function of temporary stop of the sewing machine
at the time of completion of reverse feed stitching at the start of
sewing
0/1
0
39
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineer’s Manual and follow the instructions.
… 31 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Juki DDL8700B-7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info