Bedienungsanleitung Karcher SC 3 Deluxe EasyFix (Seite 14 von 188) (Alle Sprachen)

803423

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

14 English

Do not direct the steam at glued laminated edges as the

edge band may loosen.

Do not use the appliance for cleaning unsealed wood or

parquet floors.

Do not use the appliance for cleaning painted or plastic

coated surfaces such as kitchen or living room furniture,

doors or parquet.

1. To clean these surfaces, steam a cloth briefly and

use it to wipe over the surfaces.

Glass cleaner

ATTENTION

Glass breakages and damaged surfaces

Steam can damage sealed points of the window frame

and, at low outside temperatures, lead to tension on the

surface of window panes and hence to glass breakages.

Do not direct the steam at sealed points on the window

frame.

At low outside temperatures, heat up the window panes

by gently steaming the full surface of the glass.

Clean the window area with a manual nozzle and

cover. To remove the water, use a squeegee or wipe

the surfaces dry.

How to use the Accessories

Steam gun

The steam gun can be used for the following applica-

tions without accessories:

●For removing slight creases from the hanging cloth-

ing items: Steam the clothing item from a distance of

10-20 cm.

●For wiping damp dust: Steam a cloth briefly and use

it to wipe over the furniture.

Spotlight nozzle

The spotlight nozzle is suitable for cleaning areas, joins,

fittings, drains, sinks, WCs, blinds or radiators that are

difficult to access. The closer the spotlight nozzle is to

the soiled area, the greater the cleaning efficiency will

be as the temperature and steam volume are at their

highest at the nozzle opening. Larger lime deposits can

be treated before steam cleaning with a suitable deter-

gent. Allow the detergent to soak in for

approx. 5 minutes and then steam it off.

1. Slide the spotlight nozzle onto the steam gun.

Illustration C

Round brush (small)

The small round brush is used for cleaning stubborn dirt.

Stubborn dirt can be removed more easily by brushing.

ATTENTION

Damaged surfaces

The brush may scratch sensitive surfaces.

It is not suitable for cleaning sensitive surfaces.

1. Fit the round brush to the spotlight nozzle.

Illustration D

Round brush (large)

The large round brush is suitable for cleaning large

rounded surfaces, e.g. wash basin, shower tray, bath

tub, kitchen sink.

ATTENTION

Damaged surfaces

The brush may scratch sensitive surfaces.

It is not suitable for cleaning sensitive surfaces.

1. Fit the large round brush to the spotlight nozzle.

Illustration D

Power nozzle

The power nozzle is used for cleaning dirt and for blow-

ing down corners, on joints, etc.

1. Install the power nozzle onto the spotlight nozzle as

suitable for the round brush.

Illustration D

Crevice brush

1. The crevice brush is used for cleaning narrow gaps

e.g. window recess and cranks in the walls.

Illustration D

Manual nozzle

The manual nozzle is used for cleaning small areas that

can be washed down, shower cubicles and mirrors.

1. Push the manual nozzle onto the steam gun accord-

ing to the spotlight nozzle.

Illustration C

2. Pull the cover over the manual nozzle.

Floor nozzle

The floor nozzle is used for cleaning washable wall and

floor coverings e.g. stone floors, tiles and PVC floors.

ATTENTION

Damage due to build-up of steam

Heat and moisture can lead to damage.

Check the heat resistance and steam effect on an in-

conspicuous area using a minimal volume of steam pri-

or to use.

Note

Detergent residue or care emulsions on the surface to

be cleaned can lead to streaks during steam cleaning,

which will disappear however once these have been

used several times.

We recommend sweeping the floor or vacuum cleaning

it before using the device. In this way the floor will be

cleared of dirt and loose particles before the wet clean-

ing commences. Work slowly on surfaces that are heav-

ily soiled so that the steam has longer to take effect.

1. Connect the extension tubes with the steam gun.

Illustration E

2. Push the floor nozzle onto the extension tube.

Illustration F

3. Fasten the floor cleaning cloth to the floor nozzle.

a Place the floor cleaning cloth with the hook and

loop fastener strips pointing upwards on the floor.

b Place the floor nozzle onto the floor cleaning

cloth, applying slight pressure.

Illustration Q

The floor cleaning cloth will stick to the floor nozzle

of its own accord due to the hook and loop fastener.

Removing the floor cleaning cloth

1. Place one foot on the bottom corner of the floor

cleaning cloth and lift the floor nozzle up.

Illustration Q

Note

Initially, the floor cleaning cloth's hook and loop fastener

strip is very strong and cannot be removed from the

floor nozzle easily. After the floor cleaning cloth has

been used several times and washed, it is easier to re-

move from the floor nozzle and it has reached the opti-

mum adhesion.

Parking the floor nozzle

1. Hang the floor nozzle in the park bracket during

breaks in work.

Illustration O

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 3 Deluxe EasyFix Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info