Bedienungsanleitung Karcher SV 1905 (Seite 17 von 276) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478156

Zoom out

Zoom in

Vorherige Seite

1/276

Nächste Seite

– 7

liquids or undiluted acids (e.g. deter-

gents, benzene, paint thinner, and ace-

tone) into the water reservoir as these

substances affect the materials used on

the appliance.

 The appliance must provide of a stable

ground.

 Do not place the machine on heat-sen-

sitive surfaces.

 Do not place the machine in the vicinity

of swtich-on stoves, electrical ovens or

other sources of heat.

 Press the switches lightly and avoid us-

ing sharp objects such as pins, pens/

pencils and similar objects.

 Use and store the unit only in accord-

ance with the specifications in the de-

scription and/or figure.

 The steam switch must not be locked

during the operation.

 Please switch off the machine first us-

ing the main switch before disconnect-

ing the machine from the mains.

 To separate the machine from the

mains, pull the plug and not the power

cord.

 Never wind the main cable around the

machine, definitely not till the machine

is still hot.

 Protect the appliance from rain. Do not

store outside.

 Open the filling nozzle (7) of the water

tank (Fig. 1).

 Fill approx. 0.5 litre water into the water

tank.

Note: You can use normal tap water.

As water naturally contains calcium that

can lead to the formation of deposits in

the boiler, we recommend the use of a

mixture consisting of 50% tap water and

50% distilled water.

 Close the filling nozzle of the water res-

ervoir (7).

Note:Water is automatically supplied from

the water reservoir to the steam boiler. The

water reservoir must be filled up twice be-

fore commissioning the machine for the first

time.

 Lift the handle (18) of the water filter

container (Fig. 2) and remove the water

filter container (17) (Fig. 3).

 Turn the handle as shown in Fig. 4 and

remove the water filter unit (19).

 Fill the water filter container (17) with

tap water till the water level marking

MAX H

O is covered (Fig. 5).

 Add a cap full of foam stop to the water

filter container.

Note: The functioning of the vacuum clean-

er is based on the whirling of the suction air

in the water filter. In the process, sucked-in

materials and deposits of cleaning agents

from floors get collected in the water bath.

This can sometimes lead to the formation of

foam. It is necessary to add the foam stop

liquid to the water filter bath to avoid this sit-

uation. The foam stop liquid is environ-

ment-friednly and fully bio-degradable.

Slight foam formation is normal and does

not hamper the functioning of the machine.

 Insert the water filter inlay (19) back into

the water container (17).

 Lift the handle (18) of the water filter

container and insert the water filter con-

Preparing the Appliance

Filling the Water Reservoir

Filling the water filter container

17EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SV 1905 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info