Bedienungsanleitung Karcher SV 1905 (Seite 18 von 276) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478156

Zoom out

Zoom in

Vorherige Seite

1/276

Nächste Seite

– 8

tainer (17) back into the machine.

 Bring the handle (18) back to its initial

position on the water filter container.

Always place the machine in a horizontal

position during operation.

ṇ Caution:

The water filter container must always be

filled up when the machine is running.

 Open the flap of the machine socket (9);

insert the steam plug (B1) into the sock-

et till you hear it lock. (Fig. 6).

 Connect the mains plug to a suitable

socket.

All accessories can be installed directly at

the handle (A) or at the steam suction tubes

Note:Handle (A) has a child safety lock

(A2) that prevents accidental steam re-

lease. It is recommended that you activate

the child safety lock (press it towards the

left) while leaving the steam suction hose

unattended for a short time during opera-

tion. Deactivate the child safety lock (turn it

to the right) to restart steam release.

Accessories for steam and vacuum

cleaning (D, E, F):

 Connect the handle or the extension

pipe to the desired accessory till the ac-

cessory lock snaps (Fig. A).

 Check that the accessory if properly

connected before starting to use it.

 To remove the accessory: Keep the

switch (A5; C1) depressed and remove

the accessory parts (Fig. B).

Accessories for vacuum cleaning (G, H):

 Connect the handle or the extension

pipe to the desired accessory without

locking the accessory lock.

You can use this appliance to vacuum dust

as well as spilled liquids.

ƽ Caution!

Please activate the child safety lock (A2) to

avoid accidental exit of steam.

 Press the main switch (1).

The first stage of the indicator lamps -

Vacuum cleaning (5) starts to blink.

 Briefly press the Vacuum cleaning (A3)

switch on the main handle (A).

Vacuum cleaning starts at the minimum

performance level. The first stage of

the indicator lamps - Vacuum cleaning

(5) glows continuously.

 To stop vacuum cleaning operation,

press the Vacuum cleaning switch (A3)

again.

Note! When you restart vacuum cleaning

function, the machine starts at the previous

vacuum cleaning setting.

You can set the vacuum cleaning perform-

ance based on the surface to be cleaned.

 Press the vacuum cleaning switch (A3)

and keep it depressed.

The vacuum cleaning performance first

increases gradually and decreases

gradually on reaching the maximum

performance level. . This is displayed

on the indicator lamps - vacuum clean-

ing (5).

– Level 1: For curtains

– Level 2: For upholstered furniture and

cushions

– Level 3: For carpets

– Level 4: For hard floors and sucking in

liquids

Note: The numbers indicating the lev-

els correspond to the display of the indi-

cator lamps for vacuum cleaning.

 If the dirt water level in the water filter con-

tainer (17) has reached the maximum lev-

el, then the vacuum cleaning function is

automatically blocked (you can then hear

a higher speed of the motor).

Operation

Connecting the accessories

Vacuum cleaning operation

Setting the vacuum cleaning

performance

Water filter

18 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SV 1905 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info