Bedienungsanleitung Karcher SV 1905 (Seite 20 von 276) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478156

Zoom out

Zoom in

Vorherige Seite

1/276

Nächste Seite

– 10

Note:Always clean all the accessories that

you use and the water filter container (17)

before you put the machine away.

 Remove all accessories.

 Rinse all the accessories with clean wa-

ter from the tap and then let them dry.

 Lift the handle (18) of the water filter

container (Fig. 2) and remove the water

filter container (17) (Fig. 3).

 Turn the handle as shown in Fig. 4 and

remove the water filter unit (19).

 Empty the water filter container by tilting

it in the direction of the pouring device

(Fig. 10).

 Remove the pipe benders (23) from the

filter casing with the micro-perforation grid

(22) till it is fully detached (Fig. 11a).

 Remove all components and wash

them under flowing water. (Replace the

filter if it is damaged. Please contact an

authorised Customer Service to pro-

cure a new filter).

 Insert the water filter inlay (19) back into

the water container (17).

ƽ Caution!

Ensure that the arrow on the pipe bender

(23) matches the marking on the filter with

micro-perforation (22) (Fig. 11b).

 Roll the supply cord up evenly and

place it in the cord compartment (13)

(Fig. 8).

 Place the water filter container (17)

back into its position and ensure that it

is positioned correctly.

Please read the cleaning instructions of the

manufacturer before treating leather, spe-

cial fabrics and wooden surfaces and al-

ways do a trial on a sample or some hidden

part. Let the steam-treated surface dry and

then check whether there are any changes

to the colour or form on account as reaction

to the steam.

We recommend that you be very careful

while cleaning wooden surfaces (furniture,

doors, etc.) because long exposure to

steam can damage the wax coating, the fin-

ish or the surface colours. Hence we rec-

ommend that you use steam only for short

intervals or first clean the surface with a

cloth that has been steam-moistened.

For highly sensitive surfaces (for e.g. syn-

thetic materials, painted surfaces, etc.) we

recommend that you use the steam func-

tion at the minimum performance level.

We recommend that you use the floor noz-

zle on large surfaces, ceramic floors, mar-

ble floors, parquet (only at maximum

vacuum cleaning level and minimum steam

level), carpets, etc. by using the following

attachments.

 Bursh lamellas (D1) for dry vacuum

cleaning.

 Hard rubber lamellas (D2) for cleaning

and brushing carpeted floors.

 Rubber lamellas (D3) for sucking in liq-

uids on smooth surfaces.

 Remove existing attachments from the

side.

 Insert the desired attachments from the

side (Fig. C).

Hinweis:Push the brush lamella with crev-

ices in the front, the second one at the rear

of the nozzle.

While inserting rubber lamella (D3) make

sure that the smooth surface is on the inner

side.

Storing the Appliance

Emptying and cleaning the water filter

container

How to Use the Accessories

Floor nozzle (D)

Mounting the attachments

20 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SV 1905 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info