Bedienungsanleitung Kaysun COMPAK KHP (Seite 16 von 23) (Englisch)

771580

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Installation & Owner's Manual

① ③

④⑨

⑦ ⑥ ⑤

②

⑧

No Icon Description

Timer

There are six timers can be set.

If anyone of them has been set,

will lighten the corresponding one when screen

is unlocked;

If there is none of timers has been set, it will

keep extinguished.

If timer is being set, will ash the

corresponding one with 2Hz frequency as well

lighten the timer which has been set.

Clock and clock setting

shows the clock.

Whenever there is any setting for clock,

will be lightened.

Fig.5-3

Any pressing of button is effective only under button and display

unlocked state.

Table.5-2

No Icon Description



Manually turn E-heater ON

If E-heater is OFF, follow these steps below to

manually turn it on.

Icon will ash.

Conrm manually turning E-heater on,

then E-heater is activated to heat up

water to the target temperature. After

that, if need manually turn E-heater on

again, please repeat these steps.

If E-heater is already ON, Press will lead to

show invalid icon

Invalid

on the display.

Long pressing the button for 10s then can

shift to set the temperature display unit from "F" to "C"

or from "C" to "F". The default is "C"(when it's shifted

to display "F", it still will display "C" while querying).



INCREASE

If screen is unlocked, corresponding value will

increase by pushing .

● When setting temperature, press more than

1s, Temperature value will be increased continuously;

● When Setting clock/timer, press more than

1s, Clock/timer value will be increased continuously;

● When setting vacation days, press more than

1s, day value will be increased continuously;

On querying, check items will page up by pressing

No Icon Description

3.1 3.1

Set Clock

Press button for 3 sec to enter

clock setting. Then icon will

be lightened and the hour value of

clock will ash slowly.

Set the hour value of clock.

Conrm the hour setting. Then the

minute value of clock will ash slowly.

Set the minute value of clock.

Conrm the minute setting and quit

clock setting.

3.2 3.2

Set Timer

Enter timer setting.

Select timer( ~ ) which needs

to be set. The timer icon will ash

slowly if it is selected.

Conrm the selected setting timer.

Then will be lightened. Then

the hour value of timer will ash slowly.

Set the hour value of timer.

Conrm the hour value of timer. Then the

minute value of timer will ash slowly.

Set the minute value of timer.

Conrm the minute value of timer.

Then ON or OFF icon following the

setting timer will ash slowly.

Set the action(ON or OFF) of the timer.

Conrm the action(ON or OFF) of the

timer.

The display screen will automatically

display different value at by

different action. It will display the last

set temperature and icon SETSET, if the

action is ON, and will display if

the action is OFF.

Set the water temperature of the setting

timer.

Conrm and complete the timer. Then

repeat this process to set another timer.

ON/OFF

OFF

Display

Operation

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨

⑩

15 1216 13

14.1 14.2

OFF

SET

DAY

Invalid

SET

CLOCK

OFF

VACATION CANCEL

CLOCK

TIMER

ENTER

Press 3 seconds

for lock/unlock

DISINFECT

OFF

SET

DAY

Invalid

SET

CLOCK

OFF

ON/OFF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun COMPAK KHP Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info