Bedienungsanleitung Kenwood TH-D72A (Seite 65 von 75) (Englisch)

606703

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

APRS – 22

■ UITRACE

When using the TH-D72 as a digipeater, set whether or

not UITRACE digipeat runs.

When the received UI Frame character string matches

the entered alias (for example, WIDE), the number of

hops (for example, 2-2) is processed and decreased by

1 (for example, WIDE2-2 becomes WIDE2-1), and your

station callsign is added to the UI Frame.

1 Access Menu 3O0.

2 Set <UItrace> to “On” or “Off”.

3 Access Menu 3O1.

• You enter Alias Setting mode.

4 Enter the UITRACE alias.

• When running UITRACE digipeat, set the character

string of the alias that is used.

STORING USER PHRASES

Access Menu 3P0.

This function (clipboard image) allows you to paste

phrases into the APRS message compilation mode. You

can create up to 8 phrases each of which can consist of

up to 32 characters.

• The user phrase function can only be used in the message

compilation mode.

• Before a message is copied, the number of letters cannot

be guaranteed. Only the number of letters available will be

copied, the remainder will be truncated.

• To copy a message, enter message compilation mode,

press [F] to enter function mode, then press [1] (Paste 1),

[2] (Paste 2), [3] (Paste 3), [4] (Paste 4), [5] (Paste 5), [6]

(Paste 6), [7] (Paste 7), or [8] (Paste 8) key for 1 second to

copy the message that has been set up for each key.

• If the user messages are not set up, they cannot be used.

STORING AUTO MESSAGE REPLY

While you are driving, for example, you cannot

immediately answer to received messages. On this

transceiver, you can program the message to be

automatically returned when a message is received.

■ Reply

Access Menu 3Q0.

Set <Reply> to “On” or “Off”.

• “AA:”, meaning “Auto Answer message”, is

automatically added to the beginning of all auto-

reply messages. This has been added, based on

the recommendations of “APRS SPEC Addendum

1.1”. Refer to http://aprs.org/aprs11.html for details.

■ Reply To Callsign

Access Menu 3Q1.

When there is a message you would like to reply to for

the specific callsign, preset that callsign for automatic

responses.

• A reply will be sent to all matching stations when

using the wildcard mark ( ).

For example, if you enter JA1

, a response is sent

to all callsigns beginning with JA1.

■ Reply Delay Time

Access Menu 3Q2.

After a message has been received, if you operate the

transceiver during the delay time, before the message

is sent, the auto-reply message is canceled. You can

set the wait time as 0, 10, or 30 seconds. The default

setting is 10 seconds.

• When a message is received before the delay time

has completed counting down, the timer will reset

and begin counting down again.

• When multiple messages are received from the same

caller before the delay time has completed counting

down, only one message will be sent through auto-reply

message.

• When the delay time is set to 0 seconds, auto-reply

message will send a response immediately following an

acknowledged received message.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-D72A Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-D72A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info