Bedienungsanleitung Kenwood TH-D72A (Seite 66 von 75) (Englisch)

606703

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

APRS – 23

■ Reply Text

Access Menu 3R0.

• The display for entering a message appears; the first digit

blinks.

• You can enter alphanumeric characters plus special

ASCII characters.

PROGRAMMING A MESSAGE GROUP CODE

Access Menu 3S0 .

Use a message group code to exchange messages only

among your group members. With one or more message

group codes programmed, you will receive messages

that include the same group code(s), besides messages

addressed to you. If you program one or more bulletin

group codes, you will not receive bulletins addressed

to other specific groups. You can program any desired

code using alphanumeric characters; up to 9 characters

for messages, and up to 4 characters for bulletins. You

can also program up to 6 codes at the same time; each

code must be separated by a comma (,). If you program

3 message group codes, for example, you will receive all

messages that include one of the 3 codes. If you program

3 bulletin group codes, you will reject bulletins addressed

to specific groups which do not use any of the 3 codes.

• You can enter 0 to 9, A to Z, , (comma), and –. For

messages, “

” is also selectable.

• The keypad on the microphone also is available to enter

alphanumeric characters.

• In order to include a message group code in your outgoing

packet, enter a group code in place of a callsign. To include

a bulletin group code, enter it following BLN#; for example,

“BLN#ABC” where ABC is a group code. Use up to 9

characters for a message group code or up to 4 characters

for a bulletin group code.

Note: Unlike a message, a bulletin including a group code will be

received by stations who do not program any bulletin group code.

SETTING SOUND

■ RX Beep Type

Access Menu 3T0.

This transceiver beeps each time it receives any type

of APRS packets.

Selection Operation

Off

The APRS beep tone does not sound.

Message

Only

Beep sounds only when a message is

received at your station address.

Mine

Beep sounds when a message is

received at your station address and

your transmitted data is received by a

digipeater.

All New

Beep sounds when a message is

received at your station address and new

packet data is received.

All

Beep sounds when a message is

received at your station address and

duplicate data or invalid data is received.

■ TX Beep

Access Menu 3T1.

When a beacon containing your station position

information (My position information) is transmitted in a

manner other than manually, you can select whether or

not it emits a beep sound.

Off: A beep does not sound.

On: A beep sounds when a beacon is transmitted

using the PTT switch or when it is automatically

transmitted. When

auto-reply message sends a

response, a beep (morse code A) will sound.

Note: Depending on the congestion level of the transmission

channel, the transmission beep sound may be delayed when

using the internal TNC DCD sense function.

■ Special Call Sound

Access Menu 3T2.

This function emits a special call sound when data is

received at My station address. Set the callsign of the

stations from which you want to receive special call

notifications.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TH-D72A Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TH-D72A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info