Bedienungsanleitung Kenwood TM-D710GA (Seite 61 von 77) (Englisch)

606707

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

APRS-16

Note:

◆ When the built-in data band is set to cross band, the Voice Alert function

does not operate.

◆ Voice alert takes precedence even when TONE, CTCSS and DCS are set.

◆ When Voice alert is ON, you cannot perform TONE or CTCSS frequency

selection and DCS code selection.

◆ When the packet speed is 9600 bps, the TONE will disrupt the

demodulation of the packet. Set the packet speed to 1200 bps when using

Voice Alert.

WEATHER STATION DATA OUTPUT

Enter Menu mode and access Menu 615.

■ Transmit <TX>

This setting determines whether or not to transmit the

meteorological data obtained from the Weather Station, with

the APRS data communication.

■ Transmit Interval Time <TX INTERVAL>

Set the interval at which the meteorological data is

transmitted with the APRS data communication.

The interval can be set to 5, 10, 30, or 60 minutes.

• The following meteorological data is transmitted:

• Rainfall

• Air temperature

• Wind direction

• Wind velocity

• Atmospheric pressure

• Humidity

• This data is transmitted with the APRS standard format (latitude/

longitude and time information).

• You can verify the meteorological data being output by viewing

MY WEATHER STATION. (Press [F], [WXi])

SETTING AS A DIGIPEATER

■ DIGIPEAT

Enter Menu mode and access Menu 616.

When using the TM-D710G as a digipeater, set whether or

not you digipeat a packet which includes your callsign in the

packet path.

In the received packet path, if you have set your callsign in

MY CALLSIGN (Menu No. 600), the digipeat completion ﬂ ag

(

) is added to your callsign and will then process the relay.

(For example, “JA1YKX-1” > “JA1YKX-1

”.)

■ UICHECK

Enter Menu mode and access Menu 617.

This function will not relay a one-time received UI frame within the

set UICHECK time. This is effective for each of UIDIGI, UIFOOD, and

UITRACE.

UI frame (Unnumbered Information frame)

Data can be transferred and the APRS beacon, etc., can be used

without making a connection. UIDIGI, UIFLOOD, and UITRACE are

all specialized UI frame relay processing modes.

■ UIDIGI

Enter Menu mode and access Menu 618.

When using the TM-D710G as a digipeater, set whether or

not UI digipeat is run.

When receiving a UI frame that matches your entered

character string alias (RELAY, WIDE 1-1, etc.) of the

beginning part of the packet path that has not yet been

digipeated, the digipeat completion ﬂ ag (

) is added to your

callsign (the callsign you set up in MY CALLSIGN) and

the relay will begin processing. (For example “WIDE 1-1” >

“JA1YKX-1

”, etc.)

1 Rotate the Tuning control to switch the function ON, then

press the Tuning control.

2 Rotate the Tuning control to select “ALIASES”, then press

the Tuning control.

• The display for entering a path appears; the ﬁ rst digit blinks.

• You can enter 0 to 9, A to Z, , (comma), and –.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TM-D710GA Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TM-D710GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info