Bedienungsanleitung Kenwood TS-870S (Seite 71 von 104) (Englisch)

606693

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

BUTTON CONFIRMATION

This handy function audibly alerts you each time a

button is pressed. In most cases, a single beep is

emitted. However, when selecting an operating mode,

you have the choice of choosing via Menu No. 36

(BP. MODE) either a single beep or a Morse code

abbreviation for the mode selected. If Morse code is

chosen, then the abbreviation shown in the table for that

mode is sent.

ALARM NOTIFICATION

An alarm will automatically alert you any time that your

action requires the TS-870S to respond in a manner

that is outside its set of defined parameters. The alarm

may be configured for either three beeps or a Morse

code message via Menu No. 37 (WARN. BP).

The messages that you will hear include:

DISPLAY DIMMER

The Display illumination can be switched between two

levels. Menu No. 50 (DIMMER) selects either High (H)

or Low (L) intensity. The default is High (H).

11 OPERATOR CONVENIENCES

QUICK DATA TRANSFER

The TS-870S has the capability to quickly and

conveniently transfer the receive frequency, receive

mode (computer command “0B”), and the transceiver ID

(computer command “ID”) over to another compatible

transceiver. Compatible transceivers include:

• TS-870S

• TS-950SDX

• TS-850S

• TS-690S

• TS-450S

This function could be useful while contesting. A

spotting station that is searching for new contest

multipliers can quickly transfer a frequency over to the

running (main) station. Even as a single operator, with

a little practice, you could use this Transfer function for

transferring frequencies from a spotting transceiver over

to your running transceiver. In this way, you get part of

the benefit of a multi-operator team while still operating

as a single-operator entry; an easy way to give a

significant boost to your score. The Transfer function is

fast, efficient, and increases your chances of working

multipliers that you might miss otherwise due to holding

a frequency by calling CQ.

Besides contest operation, the Transfer function can

also prove useful if you enjoy monitoring more than one

frequency simultaneously during day-to-day operating.

Even if monitoring another band, you can quickly

transfer any frequency over to your main transceiver

and be ready to make a call fast enough to beat the DX

packetcluster crowd.

SETTING UP

■ Equipment Needed

• TS-870S transceiver

• Compatible transceiver

• Interconnecting cable

•IF-232C (only necessary if transferring data to a

transceiver other than the TS-870S)

The cable ends must be terminated with a 9-pin

RS-232C female connector to mate with the TS-870S

COM connector and a 6-pin DIN male connector to

mate with the ACC 1 connector on any of the other

transceivers. If using two TS-870S transceivers, then

both ends need a 9-pin RS-232C female connector.

The cable must also have the TXD/RXD and CTS/RTS

wires crossed respectively so the cable will act as a null

modem when connected between the transceivers.

If two TS-870S transceivers are connected together, the

same COM connector baud rate must be used on each

transceiver. If transferring to or from other KENWOOD

transceivers, select 4800 bps and 2 stop bits on the

TS-870S.

LSB

USB

CW –R

FSK

FSK –R

. _ . . (L)

. . _ (U)

_ . _ . (C)

_ . _ . . _ . (CR)

. _ . (R)

. _ . . _ . (RR)

. _ (A)

. . _ . (F)

Morse Code Output

Mode

You attempted to start memory

scanning when it wasn't possible.

You attempted to use Quick Channel

Search to locate either a

programmed or a vacant memory

channel when it wasn't possible.

You accessed the Quick Menu and

attempted to change to a different

Menu No. when the Quick Menu was

not defined (there are no items in the

Quick Menu).

CHECK

OVER

Morse

Message

Reason

You attempted to directly enter a

frequency that is outside the allowable

range.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kenwood TS-870S Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kenwood TS-870S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info