Use key F3 or F8 to select the Voice and the Value keys to set the type of Effect.
Amount: Effect amount control. Use the F4 or F9 key to select the Voice and the Value keys to
modify the value. Press the 2 Value keys simultaneously to reset the value to zero.
Delay - Chorus: these parameters enable the individual control of the Chorus and Delay level if 2
or 3 Effects are overlapped. Use the F5 or F10 key to select the 4 Voices for both Chorus and for
Delay. Use the Value < > keys to control the amount.
Use the Page > key to proceed to Page no.3 Edit Program concerning the Range, Velocity,
Sustain, Portamento, Duet and Trio functions.
Voices: Use the F1 or F 6 key to select the Voice for which the Voice is to be changed.
Range: this parameter restricts the keyboard section within which the Voice may function.
2 Sections are foreseen for each Voice which establi-
sh the lowest note and the highest note.
Use function keys F2 or F 7 to select the sector.
The value of the lowest and highest note for the
Voice is set by directly playing these notes on the
keyboard from C1 to C6 (or using the Value < >
keys). By pressing the 2 Value < > keys simultaneou-
sly OFF appears in both sectors. When the Voice is in
the Off mode, this means that it plays over the entire
keyboard but once the keyboard split is enabled with the Arranger to the left, it will play only in
the melody part. This is the most frequently used mode, but there is also the possibility of
assigning a part of the program to the left and the other to the Song part. To achieve this
second possibility, merely set a Range with a value of i.e. C1-C3 on the Voices to be assigned
to the left.In this case, even if the keyboard split is enabled on C3, these Voices will remain
active on the left-hand side or Arranger. This function proves particularly useful to enhance
the background sounds of the Arranger in addition to the 2 Lower, or to transform the left-
hand side of the Program in a true lower Manual Organ, if the instrument is to be configured
as an Organ by connecting the MIDI pedal.
Velocity Switch: this parameter enables the control of the Program Voices functioning, according
to the keyboard dynamics. Use keys F 3 or F 8 to select the Voice. Use the Value < > keys to
select the Velocity operational Mode:
Normal: normal sound dynamics.
Low: in the low position the Voice plays with a dynamic amplitude that ranges from the minimum to
the Threshold value.
Il Threshold consists of a Dynamic threshold above or below which the Voice will no longer play.
I.e. in the Low position and with a Threshold value of 64, the Voice will play from the minimum
to the Dynamic value of 64.
Use key F 10 to select the function and the Value < > keys to search for the Threshold value.
High: in the High position the Voice will play only when the Threshold value is exceeded up to the maxi-
mum dynamic value. ( 127 ). The Velocity Switch function may be used to create Programs in which
there is a strong voice differentiation between soft dynamics and maximum dynamics.
Cross: in the Cross position and only for the first two voices, you can obtain the gradual cros-
sing from the first voice over to the second one depending on the dynamics applied to the
keyboard. The Dynamics threshold where one sound crosses over to the next can be selected
by means of the Threshold value.
Sustain - Portamento: this parameter enables the Sustain pedal effects function (optional) and
Portamento on the individual Voices (if the Portamento key is pressed).
Use key F4 or F9 to select the Voice and the Value < > keys to confirm the Effect selected.
12
