Level 1 / Level 2: these 2 parameters (F1 and F 2) control the input level of the stereo Microphone
separately for part 1 and part 2. It is indeed possible to connect 2 Microphones to the instrument
by means of a special adaptor indicated in the illustration.The Input Micro Overload LED situated
at the right-hand side of the panel next to Registration, points out that the Micro Input is saturated.
In this case it may be useful to reduce the Microphone Gain using the potentiometer situated on the
front panel.The volume of part 1 and part 2 is modified using the Value + / - keys.
Pan 1 / Pan 2: (F 3 - F 4) pan Pot control on the part 1 and 2 of the Microphone. The value is
modified using the Value + / - keys.
Music Vol (F5): this function allows you to adjust the global volume of the keyboard without alte-
ring the volume of the microphone. The range is from 32 to 63.
Echo/Reverb 1 / 2: (F 6 - F 7) these 2 parameters separately control the amount of the Echo or
Reverberation Effect on the 2 Micro Inputs.
By repeatedly pressing key F 6 or F 7 part 1 or part 2 is selected and the value of the effect is
modified using the Value + / - keys.
Pitch Shift: Vocal shift effect by 1 ovate on the Voice tuning (+ / - 12). The Pitch Shift functions
exclusively on part 1 of the Microphone.
Dry: (F 9) this parameter cuts out the Echo or Reverberation Effects on the Microphone.
Quite useful for changing over from “singing” to “speaking” during the live performance.
Active / Inactive: (F 10). Microphone cut out function, particularly useful if the microphone is not
provided with the On/Off switch.
VOCALIZER
You can access it from the Effects menu by pressing F5.The Vocalizer is a professional
Harmonizer effect (optional) that can be applied to the instrument. It is capable of synthesizing
3 harmonising Voices on the basis of the note sung at the microphone input and it provides for
many control functions such as Harmony type, Effects, Filter, Octave etc. The Vocalizer kit is
supplied upon request and it should be installed inside the keyboard by specially qualified per-
sonnel in accordance with the instructions attached. All information regarding the operation of
the VOCALIZER section is contained in a special Instructions Manual that is provided together
with the Vocalizer Kit (optional).
EQUALIZER:
3-band Equalizer: Low, Mid, Hi . To gain access to the function:
1 Enter into the Effects menu using key F 2.
2 Press key F 6.
3 Use keys F1, F2, and F 3 to choose the band;
use the Value + / - keys to select the values from
2 to 12 dB + / -.
The Equalizer globally affects the instrument and therefore affects both the external and internal
amplification. The set Equalizer combination is stored until the instrument is switched off but
may be saved in Registration and in the Power On Set Up function.
CHORUS: To gain access to the Chorus effects:
1 Enter into the Effects menu using the F2 key from the main display.
2 Press key F 7 . Use the Value + / - keys to select the 12 types of Chorus available:
20
