646967
28
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
Training and operating instructions
Programmes - > Performance profiles (fixed)
The menu item “Performance profiles (fixed)” contains 10 trai-
ning profiles, which differ in duration and intensity. The per-
formance is adjusted according to the default setting profile.
To the right of the programme number, you find the values for
the duration and the length of the programme. The profile is
shown magnified at the bottom of the display.
I
If the content of a menu cannot be displayed in one single
view, a scrolling bar is available on the right-hand side. You
can scroll the view up and down by means of the navigati-
on keys “Up” and “Down”. The selection is highlighted
in white and marked with (active).
Note:
Programmes - > Performance profiles (individual)
The menu item “Performance profiles (individual)” contains 5
training profiles. You can adjust these profiles as to duration,
length and intensity.
Editing the “Performance Profiles (individual)” is described on
page 14.
Note:
Programmes - > HRC programmes (manual)
The menu item “HRC (manual)” contains two training program-
mes: “Count Up” and “Count Down”. In both programmes a
target pulse is achieved by performance regulation and is main-
tained over the training period. The target pulse is either adop-
ted from the default settings in the menu: Default Settings - >
Default Setting Pulse or is set to 130, if no data is available. The
values, which you preset or which have been adopted from the
default settings in the menu: Default Settings - > Training values,
are counted up in the “Count Up” mode and are counted down
in the “Count Down” mode.
Programmes - > HRC (fixed)
The menu item “HRC (fixed)” contains 5 training profiles,
which differ in duration and intensity. In these programmes,
changing target pulses are achieved by performance regulati-
on. The profile height of the programme depends on the
entries of your maximum pulse in the menu: Default Settings -
> Default Setting Pulse. If no data is available, an age of 50
years and a maximum pulse of 170 are set automatically.
8
GB
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kettler 07865-000 - Syncross V3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kettler 07865-000 - Syncross V3

Kettler 07865-000 - Syncross V3 Installationsanweisung - Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info