Bedienungsanleitung Koenic KRVC 2320 RC (Seite 24 von 148) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

782606

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Size - A5

English

Fig. 17 Insert the water tank into the vacuum

robot.

For operation, follow the instructions in

the chapter Operating as a vacuum

cleaner. The robot will automatically

return to the charging base, after the

cleaning process has been ﬁnished, or

if the battery level is low. Note, that

the water tank has to be removed

immediately to avoid damages to the

ﬂooring.

Note:

•In order to enhance the wet cleaning result,

it is advised to vacuum the area prior to

the wet cleaning, to remove dust and other

small residues.

•Wet the mop for before each use.

Attention

Water will start to drip out of the

attachment, as soon as the water tank has

been inserted. Start the cleaning process

immediately after inserting the water tank,

so avoid possible damages to the ﬂoor. Due

to the same reason, remove the water tank

directly after the cleaning process has ended.

Always supervise the product during the

cleaning, to prevent water damages to the

ﬂooring, in case the robot should get stuck.

The supplier is not liable for damages, that

occur due to the negligence of all given

warnings and remarks concerning the usage

of the product as well as the cleaning of the

ﬂooring.

Fig. 18 After swabbing, remove the water tank

with the mop cover.

Fig. 19 Open the rubber cap and pour

remaining water out of the tank.

Fig. 20 Remove the mop cover from the water

tank and wash it with a little detergent

and rinse it o. Wring the mop cover

slightly and let it dry.

Fig. 21 Attach the mop cover in the correct

position on the water tank. A

replacement mop cover is included.

Recommendations for a better

cleaning result

Vacuuming

• Before starting the vacuuming process,

remove all objects that stand/ lay on the

ﬂoor, which could interfere with the process

or in which the robot could get tangled up

(e.g. toys, carpets with longer cords etc.).

• Make sure that no objects hang down onto

the ﬂoor, in which the robot could get stuck

(e.g. power supply cables, curtains etc.).

• If possible, place chairs on the table during

the vacuuming process, in order to minimize

the number of obstacles on the ﬂoor.

• Block areas, in which the robot could get

stuck (e.g. closets with lowered boards,

tapered areas in between closets etc.).

• Make sure that all brushes can rotate freely

and aren’t blocked. Clean them if necessary.

• Empty the dust container.

Swabbing

• Observe all recommendations listed above.

• Have the robot vacuum the area before

swabbing, in order to reduce the amount of

dust on the ﬂoor.

• Soak the cleaning cloth under running water

and slightly wring it out, before attaching it

to the water tank, to enhance the cleaning

result and to achieve an equal distribution

of water onto the ﬂoor.

• If necessary, pause the swabbing process

and manually wring out the cleaning cloth,

removing bigger particles, before continuing

the process.

IM_KRVC2320RC_190807_V10_HR.indb 24 7/8/2019 14:43

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Koenic KRVC 2320 RC Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info