Bedienungsanleitung Korg VOX Continental (Seite 21 von 26) (Englisch)

707384

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

EnglishFrançaisDeutschEspañol

En-21

System Settings 4. Local control

Connecting an external MIDI keyboard, and

configuring the MIDI channels

1 Connect the MIDI OUT connector of the MIDI keyboard to

be used for the lower part, to the MIDI IN connector of this

instrument.

2 Set the MIDI transmission channel of the MIDI keyboard

to be used for the lower part, to any MIDI channel besides

the one set on the VOX Continental.

Lower part MIDI channel settings for this instrument

1 Hold down the EXIT button and press the SCENE 3 button.

(The SCENE 3 button blinks.)

2 Using the ORGAN part VARIATION , buttons, match

this instrument’s receiving MIDI channel to the LOWER

MIDI keyboard’s MIDI transmission channel.

Note: The LOWER MIDI channel cannot be set to the same

channel as the MIDI channel, shown in “2. MIDI channel”

(see page 20).

3 Push the SCENE 3 button to apply the settings.

 Push the EXIT button to cancel the settings.

4. Local control

This setting prevents notes from being sounded in duplicate

when this instrument is connected to a DAW and the

performance data is echoed back from the sequencer. (Echo

back occurs when the performance data transmitted when

playing this instrument is re-transmitted back to this

instrument from the DAW.) In this case, switch to

(local

control off). (Default setting: on)

1 Hold down the EXIT button and press the DYNAMICS

button. (The DYNAMICS button blinks.)

2 Switch this setting on or off using the ORGAN part

VARIATION



,  buttons.

: This instrument and its controllers will be internally

disconnected from the sound generator. This prevents echo

back.

: Select this setting when you are using this instrument

by itself.

3 Push the DYNAMICS button to apply the settings.

 Push the EXIT button to cancel the settings.

5. Velocity curve

This configures how the volume and tone will be changed in

response to how hard the keys are played (velocity) on this

keyboard. (Default setting: 4)

1 Press the EXIT button and the part select PIANO button.

(The PIANO button blinks.)

2 Set the velocity curve using the ORGAN part VARIATION

,  buttons.

: These curves produce an effect when you play

strongly.

: This is the typical curve.

: These curves let you produce dynamic change

without having to play very hard.

: This curve provides a flat effect when playing softly.

: This curve provides an even more flat effect when

playing softly.

: This curve produces an even softer response when

playing softly compared to the typical curve #4.

3 Push the PIANO button to apply the settings.

 Push the EXIT button to cancel the settings.

6. Organ key trigger

This sets whether the organ sound plays when you play the

keys lightly or play deep into the keys. Setting the sound to

play when a key is lightly pressed will let you play the

keyboard like a vintage tonewheel organ. (Default setting: Lo)

1 Hold down the EXIT button and press the KEY/LAYER

part select button. (The KEY/LAYER button will blink.)

2 Set the trigger position using the ORGAN part

VAR IATION



,  buttons.

h i

: The organ sound will play when the keys are pressed

lightly.

: The organ sound will play when the keys are pressed

deeply.

3 Push the KEY/LAYER button to apply the settings.

 Push the EXIT button to cancel the settings.

7. Auto power off

When a set period of time has passed without playing the

keys, turning the knobs or pressing the buttons on this

instrument, the power is automatically turned off. This is

called “auto power off”. (Default setting: 4h)

1 Hold down the EXIT button and press the SCENE 4 button.

(The SCENE 4 button blinks.)

2 Enable auto power off with the ORGAN part VARIATION

,  buttons.

(Disable): The auto power off function will be disabled.

The power will not automatically turn off.

(4 hours): When the VOX Continental is left on for 4

hours without being operated or played, it will

automatically turn off.

3 Push the SCENE 4 button to apply the settings.

 Push the EXIT button to cancel the settings.

8. VOX logo LED on/off

This turns the VOX logo LED on the rear panel on or off.

(Default setting: On)

1 Hold down the EXIT button and press the ORGAN part

select button. (The ORGAN button blinks.)

2 Use the ORGAN part VARIATION ,  buttons to set

whether the VOX logo LED lights up or not.

: off

: on

3 Push the ORGAN button to apply the settings.

 Push the EXIT button to cancel the settings.

Soft

127

Strong

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg VOX Continental Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg VOX Continental

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info