Bedienungsanleitung Korg VOX Continental (Seite 23 von 26) (Englisch)

707384

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

EnglishFrançaisDeutschEspañol

En-23

System Settings 13. Saving the scene data

13. Saving the scene data

This saves the 16 scenes that have been saved on or written to

the VOX Continental, to a USB storage device (commercially

available) that is connected via the USB A port.

For instance, you can save the scenes that you created at home

to a USB flash drive, and then load the data file into another

VOX Continental at the studio or onstage to recreate your data.

You can create, save and manage your data by project, so that

you can recall the scenes you need at any time.

1 Plug a USB storage device into the USB A port of the VOX

Continental.

Note: The USB A port on this instrument supports hot-

plugging (meaning that the USB media/cable can be

removed while the power is turned on).

2 Hold down the EXIT button and press the BANK 

button.

The characters will be shown in the VARIATION

displays of the E. PIANO, PIANO and KEY/LAYER parts.

The BANK A LED will blink, and the value will be shown

in the VARIATION display of the ORGAN part.

3 Set the file number using the ORGAN part VARIATION

,  buttons.

A file number from 00 to 99 can be set.

If a file with the same file number is already saved in the

USB storage device, a dot will be shown in the bottom

right-hand corner of the number.

4 Push the BANK button to save.

The BANK A LED will blink quickly while the data is

saved, and will return to its previous state after saving is

finished.

 Push the EXIT button to cancel the settings.

 If a file with the same file number that you selected in step

3 already exists in the USB storage device, the word

will blink in the VARIATION displays of the E.PIANO,

PIANO and KEY/LAYER parts.

Press the BANK  button to overwrite the file.

Storage media that can be used

USB storage devices, such as MS-DOS FAT16 or FAT32-

formatted flash media or disks

Maximum usable storage capacity

FAT32: Up to 2 TB (2000 GB)

FAT16: Up to 4 GB

When saving to storage media, the “VOX/Continental”

directory will automatically be created in the media’s root

directory. This directory will be used exclusively by the VOX

Continental.

When you save the scene data, a file named

“CONTINENTAL_00.SCE” will be saved in this directory.

The 00 digits will be replaced with the file number you set.

Note: If the media format is not MS-DOS, FAT16 or FAT32, an

error message (

Err

) will be shown in the VARIATION displays

of the PIANO and KEY/LAYER parts.

Press the EXIT button to escape, and format the storage media

on your computer.

If there is very little free space remaining on the storage media

and data cannot be saved, the message

Err

will be displayed.

In this case, delete any unnecessary files from the storage

media to free up disk space, or use a different storage media

with more capacity.

When loading a .SCE file from storage media, only the

.SCE files in the “VOX/CONTINENTAL” directory can

be shown and selected for loading. Note that if you

change the directory, folder hierarchy or filename using

your computer, you will no longer be able to load the file.

The VOX Continental recognizes filenames that look like

“CONTINENTAL_xx.SCE”. If you change the file name

or extension on a computer or other device, the VOX

Continental will recognize this as an undefined file, and

will not be able to load it.

14. Loading the scene data

You can load scene data (16 scenes) back into the VOX

Continental, which was previously saved to a USB storage

device (commercially available).

Doing this will load scene data into memory. Any

factory-set default data or scene data that you have

edited and saved on this instrument will be overwritten,

and the data will be lost. If you want to keep your scene

data, save the data to a USB storage device.

1 Plug the USB storage device where you saved your scene

data into the USB A port of this instrument.

Note: The USB A port on the VOX Continental supports

hot-plugging (meaning that the USB media/cable can be

removed while the power is turned on).

2 Hold down the EXIT button and press the BANK 

button.

The characters

L o AD

will be shown in the VARIATION

displays of the E. PIANO, PIANO and KEY/LAYER parts.

The BANK D LED will blink, and a value will be shown in

the VARIATION display of the ORGAN part (all other

VARIATION displays will go dark).

3 Set the file number using the ORGAN part VARIATION

,  buttons.

You can select a file number that is saved in the USB

storage device.

Note: If there is no file that can be loaded, an error message

(

Err

) will be shown in the VARIATION displays of the

PIANO and KEY/LAYER parts.

4 Push the BANK  button to load.

The characters will be shown in the VARIATION

displays of the E. PIANO, PIANO and KEY/LAYER parts.

5 Push the BANK  button to begin loading.

The BANK D LED will blink quickly while the data is

loaded, and will return to its previous state after loading is

finished.

 Push the EXIT button to cancel the settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Korg VOX Continental Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Korg VOX Continental

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info